XEDIA-IP-MIB :: xipRouteConfiguredMaxRoutes

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › XEDIA-IP-MIB › xipRouteConfiguredMaxRoutes

xipRouteConfiguredMaxRoutes

Module: XEDIA-IP-MIB

OID (symbolic): XEDIA-IP-MIB::xipRouteConfiguredMaxRoutes

OID (numeric): 1.3.6.1.4.1.838.3.4.1.4.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The maximum number of routed Networks in the internal Route Table. It is the maximum total number of Dest/Mask (network) route entries. Depending upon system configuration and the number of route entries in the route table that are destination addresses with multple masks, it may not be possible to have a route table with the maximum number of routed networks. If this variable is changed, it will not take effect until the box is reset.

What is xipRouteConfiguredMaxRoutes?

Sets the configured ceiling (0-500000, default 81920) on the number of routed networks the internal route table can hold; changing this value requires a device reset before it takes effect, and system configuration may prevent actually reaching the maximum.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.4.1.4.3
snmpwalk -v2c -c public <target> XEDIA-IP-MIB::xipRouteConfiguredMaxRoutes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.4.1.4.3.1
snmpget -v2c -c public <target> XEDIA-IP-MIB::xipRouteConfiguredMaxRoutes.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.838.3.4.1.4.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> xipRouteConfiguredMaxRoutes.1

Start monitoring Xedia multiservice access router (per-interface IP address/netmask config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-IP-MIB::xipRouteConfiguredMaxRoutes OID value, configure state conditions and alerts, and monitor any Xedia multiservice access router (per-interface IP address/netmask config status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.838xediaXEDIA-REG
1.3.6.1.4.1.838.3xediaMibsXEDIA-REG
Numeric OIDNameModule
1.3.6.1.4.1.838.3.4xediaIpMIBXEDIA-IP-MIB
1.3.6.1.4.1.838.3.4.1xipObjectsXEDIA-IP-MIB
1.3.6.1.4.1.838.3.4.1.4xipRouteObjectsXEDIA-IP-MIB
1.3.6.1.4.1.838.3.4.1.4.3xipRouteConfiguredMaxRoutesXEDIA-IP-MIB