All MIBs › XEDIA-IP-MIB › xipIcmpRateLimit
xipIcmpRateLimit
Module: XEDIA-IP-MIB
OID (symbolic): XEDIA-IP-MIB::xipIcmpRateLimit
OID (numeric): 1.3.6.1.4.1.838.3.4.1.6.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value which limits how often ICMP error messages are sent to a destination. The value is expressed in seconds.
What is xipIcmpRateLimit?
Sets, in seconds (default 1), the minimum interval between successive ICMP error messages sent to the same destination when xipIcmpRateLimiting is enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.838.3.4.1.6.6 snmpwalk -v2c -c public <target> XEDIA-IP-MIB::xipIcmpRateLimit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.838.3.4.1.6.6.1 snmpget -v2c -c public <target> XEDIA-IP-MIB::xipIcmpRateLimit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.838.3.4.1.6.6.1 i <value>
Start monitoring Xedia multiservice access router (per-interface IP address/netmask config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEDIA-IP-MIB::xipIcmpRateLimit OID value, configure state conditions and alerts, and monitor any Xedia multiservice access router (per-interface IP address/netmask config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.838 | xedia | XEDIA-REG |
| 1.3.6.1.4.1.838.3 | xediaMibs | XEDIA-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.838.3.4 | xediaIpMIB | XEDIA-IP-MIB |
| 1.3.6.1.4.1.838.3.4.1 | xipObjects | XEDIA-IP-MIB |
| 1.3.6.1.4.1.838.3.4.1.6 | xipGeneral | XEDIA-IP-MIB |
| 1.3.6.1.4.1.838.3.4.1.6.6 | xipIcmpRateLimit | XEDIA-IP-MIB |