All MIBs › X25-OPT-MIB › cdx6500X25StatTxLastCallFailureCause
cdx6500X25StatTxLastCallFailureCause
Module: X25-OPT-MIB
OID (symbolic): X25-OPT-MIB::cdx6500X25StatTxLastCallFailureCause
OID (numeric): 1.3.6.1.4.1.449.2.1.3.1.1.2.1.45
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reason the last inbound call was rejected, since the last statistics reset. The posssible values are: notAvailable : Value not available if not a (virtual) switched data port. noFailureReported : No call failure noAvailableVirtualPort : No virtual port available securityViolation : Password security failed noResourcesAvailable : No resources available callRejected : Call failed by Xircom card invalidPhoneNumber : Phone number is incorrect outgoingCallRequestTimeout : Outgoing call req timeout callCollision : Call collision virtualPortNotAvailable : This port is not available invalidConfiguration : Configuration is incorrect failureNotSupported : Failure is not supported
What is cdx6500X25StatTxLastCallFailureCause?
Reports the reason the last outbound call was rejected from this (virtual) switched data port (the source's DESCRIPTION text describes it as an inbound call, which is a copy-paste artifact from the Rx object; the same enumeration values apply -- e.g. securityViolation, noResourcesAvailable, invalidPhoneNumber -- but for the Tx/outbound direction based on this object's own name and table position).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.2.1.45 snmpwalk -v2c -c public <target> X25-OPT-MIB::cdx6500X25StatTxLastCallFailureCause
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.2.1.45.1 snmpget -v2c -c public <target> X25-OPT-MIB::cdx6500X25StatTxLastCallFailureCause.1
Start monitoring X.25 packet-switched network access devices/routers, e.g. cdx6500 platform (port-to-protocol-group config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the X25-OPT-MIB::cdx6500X25StatTxLastCallFailureCause OID value, configure state conditions and alerts, and monitor any X.25 packet-switched network access devices/routers, e.g. cdx6500 platform (port-to-protocol-group config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3 | cdx6500Statistics | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1 | cdx6500StatProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1 | cdx6500PSTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.3.1.1.2 | cdx6500PPSTX25PortTable | X25-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1.2.1 | cdx6500PPSTX25PortEntry | X25-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1.2.1.45 | cdx6500X25StatTxLastCallFailureCause | X25-OPT-MIB |