All MIBs › X25-OPT-MIB › cdx6500X25StatRxLastCallFailureCause
cdx6500X25StatRxLastCallFailureCause
Module: X25-OPT-MIB
OID (symbolic): X25-OPT-MIB::cdx6500X25StatRxLastCallFailureCause
OID (numeric): 1.3.6.1.4.1.449.2.1.3.1.1.2.1.37
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reason the last inbound call was rejected, since the last statistics reset. The posssible values are: notAvailable : Value not available if not a (virtual) switched data port. noFailureReported : No call failure noAvailableVirtualPort : No virtual port available securityViolation : Password security failed noResourcesAvailable : No resources available callRejected : Call failed by Xircom card invalidPhoneNumber : Phone number is incorrect outgoingCallRequestTimeout : Outgoing call req timeout callCollision : Call collision virtualPortNotAvailable : This port is not available invalidConfiguration : Configuration is incorrect failureNotSupported : Failure is not supported
What is cdx6500X25StatRxLastCallFailureCause?
Reports the reason the last inbound call was rejected on this (virtual) switched data port, such as securityViolation, noResourcesAvailable, invalidPhoneNumber, or notAvailable if this port is not a switched data port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.2.1.37 snmpwalk -v2c -c public <target> X25-OPT-MIB::cdx6500X25StatRxLastCallFailureCause
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.3.1.1.2.1.37.1 snmpget -v2c -c public <target> X25-OPT-MIB::cdx6500X25StatRxLastCallFailureCause.1
Start monitoring X.25 packet-switched network access devices/routers, e.g. cdx6500 platform (port-to-protocol-group config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the X25-OPT-MIB::cdx6500X25StatRxLastCallFailureCause OID value, configure state conditions and alerts, and monitor any X.25 packet-switched network access devices/routers, e.g. cdx6500 platform (port-to-protocol-group config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3 | cdx6500Statistics | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1 | cdx6500StatProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1 | cdx6500PSTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.3.1.1.2 | cdx6500PPSTX25PortTable | X25-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1.2.1 | cdx6500PPSTX25PortEntry | X25-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.3.1.1.2.1.37 | cdx6500X25StatRxLastCallFailureCause | X25-OPT-MIB |