X25-MIB :: x25AdmnTxRejectMode

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › X25-MIB › x25AdmnTxRejectMode

x25AdmnTxRejectMode

Module: X25-MIB

OID (symbolic): X25-MIB::x25AdmnTxRejectMode

OID (numeric): 1.3.6.1.4.1.1978.2.14.1.1.1.36

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Defines how packet level handles the reception of out of sequence data packets. A value of reset will reset the virtual circuit. A value of rejectReset will send reject packet if configured as a DTE. otherwise it will reset the virtual circuit. A value of sendAlways will cause a reject packet to always be sent, even when configured as a DCE.

Note: CCITT compliance requires the selection of either reset or rejectReset. The CCITT does not allow a DCE to send a reject.

What is x25AdmnTxRejectMode?

Read-write policy for how this interface reacts to receiving out-of-sequence data packets (default reset): reset the circuit, send a Reject only when acting as DTE, or always send Reject regardless of role (CCITT does not allow a DCE to send Reject).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1978.2.14.1.1.1.36
snmpwalk -v2c -c public <target> X25-MIB::x25AdmnTxRejectMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1978.2.14.1.1.1.36.1
snmpget -v2c -c public <target> X25-MIB::x25AdmnTxRejectMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1978.2.14.1.1.1.36.1 i <value>

Start monitoring vendor-neutral, standards-based MIB, X.25 packet switch / legacy WAN router (PLE channel-assignment/packet-layer statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the X25-MIB::x25AdmnTxRejectMode OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, X.25 packet switch / legacy WAN router (PLE channel-assignment/packet-layer statistics status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1978ngcanALC-MIB
1.3.6.1.4.1.1978.2tigerALC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1978.2.14x25MIBX25-MIB
1.3.6.1.4.1.1978.2.14.1x25L3X25-MIB
1.3.6.1.4.1.1978.2.14.1.1x25AdmnTableX25-MIB
1.3.6.1.4.1.1978.2.14.1.1.1x25AdmnEntryX25-MIB
1.3.6.1.4.1.1978.2.14.1.1.1.36x25AdmnTxRejectModeX25-MIB