All MIBs › X25-MIB › x25AdmnRRTrigger
x25AdmnRRTrigger
Module: X25-MIB
OID (symbolic): X25-MIB::x25AdmnRRTrigger
OID (numeric): 1.3.6.1.4.1.1978.2.14.1.1.1.33
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This defines when the frame level sends RR.
0: Only send RR when the window is full. Very inefficient as it always causes the remote to enter flow control situations. Not recommended.
1: Send RR when receiving one mode data packet would make the window full. Suggested value on modulo 7 point-to- point links with small transit delays.
>=k: If the value of the parameter is greater than the window size, this causes RR packets to always be transmitted immediately as soon as a data packet is received. To obtain this mode of operation whatever the negitiated window size may be, it is suggested to set the value of this parameter to 128.
< k: Use the specified value,
256: This special value causes RR packets transmission to occur whenever the receive window is half full.
Where k is the value of lapbAdmnKWindowSize. (default = >=k)
What is x25AdmnRRTrigger?
Read-write threshold controlling when the packet level sends a Receiver Ready (RR) acknowledgment; the special value 256 sends RR whenever the receive window is half full, while a value at or above the window size forces an RR after every data packet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1978.2.14.1.1.1.33 snmpwalk -v2c -c public <target> X25-MIB::x25AdmnRRTrigger
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1978.2.14.1.1.1.33.1 snmpget -v2c -c public <target> X25-MIB::x25AdmnRRTrigger.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1978.2.14.1.1.1.33.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, X.25 packet switch / legacy WAN router (PLE channel-assignment/packet-layer statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the X25-MIB::x25AdmnRRTrigger OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, X.25 packet switch / legacy WAN router (PLE channel-assignment/packet-layer statistics status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1978 | ngcan | ALC-MIB |
| 1.3.6.1.4.1.1978.2 | tiger | ALC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1978.2.14 | x25MIB | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1 | x25L3 | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1.1 | x25AdmnTable | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1.1.1 | x25AdmnEntry | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1.1.1.33 | x25AdmnRRTrigger | X25-MIB |