All MIBs › X25-MIB › x25AdmnRRTimer
x25AdmnRRTimer
Module: X25-MIB
OID (symbolic): X25-MIB::x25AdmnRRTimer
OID (numeric): 1.3.6.1.4.1.1978.2.14.1.1.1.34
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This x25AdmnRRTimer only causes the transmission of an RR Packet when there are outstanding packets to acknowledge to the remote. When the transmission of RR packets to the remote is delayed because the x25AdmnRRTrigger value is set to a value within the receive window, this timer is used to force the transmission of RR packets after some time. Without this timer, delaying RR Packets would cause the last packets of a transaction never to be acknowledged.
Please note that this timer is not similar to the T24 timer. The T24 timer causes an RR packet to be sent whenever no packet carrying an ack has been sent for a while. In addition, the duration of T24 is typically fairly large (60 seconds recommended), while this RR timer should be much smaller to ensure that packets are always acknowledged in a reasonable amount of time.
Note: The time is in milliseconds.
Note: Setting x25AdmnRRTrigger to a value outside of the receive window or setting this timer value to 0 force RR packets to always be transmitted as soon as a data packet is received from the remote without any delay. UNITS: milliseconds
What is x25AdmnRRTimer?
Read-write timer, in milliseconds (default 2000), that forces an RR packet out if one hasn't been sent recently, ensuring the remote end isn't left waiting indefinitely for an acknowledgment; distinct from, and typically much shorter than, the T24 window timer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1978.2.14.1.1.1.34 snmpwalk -v2c -c public <target> X25-MIB::x25AdmnRRTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1978.2.14.1.1.1.34.1 snmpget -v2c -c public <target> X25-MIB::x25AdmnRRTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1978.2.14.1.1.1.34.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, X.25 packet switch / legacy WAN router (PLE channel-assignment/packet-layer statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the X25-MIB::x25AdmnRRTimer OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, X.25 packet switch / legacy WAN router (PLE channel-assignment/packet-layer statistics status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1978 | ngcan | ALC-MIB |
| 1.3.6.1.4.1.1978.2 | tiger | ALC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1978.2.14 | x25MIB | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1 | x25L3 | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1.1 | x25AdmnTable | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1.1.1 | x25AdmnEntry | X25-MIB |
| 1.3.6.1.4.1.1978.2.14.1.1.1.34 | x25AdmnRRTimer | X25-MIB |