All MIBs › Wellfleet-WFDOT1D-MIB › wfDot1dStaticStatus
wfDot1dStaticStatus
Module: Wellfleet-WFDOT1D-MIB
OID (symbolic): Wellfleet-WFDOT1D-MIB::wfDot1dStaticStatus
OID (numeric): 1.3.6.1.4.1.18.3.5.1.1.6.5.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 'This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.'
What is wfDot1dStaticStatus?
This read-write INTEGER indicates the status of a static filtering table entry, with values including other(1), invalid(2) meaning writing it removes the entry, permanent(3) meaning it survives a bridge reset, and time-based variants that persist only until reset or timeout. An admin sets this to control the lifecycle of a manually configured filtering rule, such as making it permanent so it is not lost across reboots. For example, setting wfDot1dStaticStatus to invalid(2) on an entry is the mechanism used to delete that static filtering rule.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.1.1.6.5.1.1.4 snmpwalk -v2c -c public <target> Wellfleet-WFDOT1D-MIB::wfDot1dStaticStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.1.1.6.5.1.1.4.1 snmpget -v2c -c public <target> Wellfleet-WFDOT1D-MIB::wfDot1dStaticStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.5.1.1.6.5.1.1.4.1 i <value>
Start monitoring Wellfleet router configured as a bridge, Bay Networks/Nortel router (802.1D port-state/spanning-tree-topology status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-WFDOT1D-MIB::wfDot1dStaticStatus OID value, configure state conditions and alerts, and monitor any Wellfleet router configured as a bridge, Bay Networks/Nortel router (802.1D port-state/spanning-tree-topology status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.18 | wellfleet | CMU-MIB |
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5 | wfApplication | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.1 | wfDataLink | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.1.1 | wfBridgeGroup | Wellfleet-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.1.6 | wfDot1d | Wellfleet-WFDOT1D-MIB |
| 1.3.6.1.4.1.18.3.5.1.1.6.5 | wfDot1dStaticGroup | Wellfleet-WFDOT1D-MIB |
| 1.3.6.1.4.1.18.3.5.1.1.6.5.1 | wfDot1dStaticTable | Wellfleet-WFDOT1D-MIB |
| 1.3.6.1.4.1.18.3.5.1.1.6.5.1.1 | wfDot1dStaticTableEntry | Wellfleet-WFDOT1D-MIB |
| 1.3.6.1.4.1.18.3.5.1.1.6.5.1.1.4 | wfDot1dStaticStatus | Wellfleet-WFDOT1D-MIB |