All MIBs › Wellfleet-TFTP-MIB › wfTftpDefaultVolume
wfTftpDefaultVolume
Module: Wellfleet-TFTP-MIB
OID (symbolic): Wellfleet-TFTP-MIB::wfTftpDefaultVolume
OID (numeric): 1.3.6.1.4.1.18.3.5.3.6.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The file system volume number to which transferred files will be written and from which they will be retrieved. The volume number corresponds to the slot number on which the volume resides. On systems with a floppy disk, the value 65 represents volume 'A'. On systems which support flash file system partitioning, the volume is = (slot * 100 + partition number) where 0 and 1 are valid partition numbers, and represent 'partition a' and 'partition b' respectively. If no default volume is specified, the system chooses the lowest available active volume.
What is wfTftpDefaultVolume?
This value is the file system volume that transferred files are written to and read from by default, corresponding to a slot number (or slot*100+partition for flash file systems, or 65 for a floppy 'A' drive); if unset, the system picks the lowest available active volume, defaulting to volume2. Admins set it to control where configuration files or firmware images land when transferred via TFTP without specifying a volume explicitly. Setting wfTftpDefaultVolume to volume1a(100) directs default TFTP transfers to partition 'a' of the volume in slot 1.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.6.2 snmpwalk -v2c -c public <target> Wellfleet-TFTP-MIB::wfTftpDefaultVolume
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.6.2.1 snmpget -v2c -c public <target> Wellfleet-TFTP-MIB::wfTftpDefaultVolume.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.5.3.6.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wfTftpDefaultVolume.1
Start monitoring Wellfleet/Bay Networks multiprotocol router (TFTP server enable/active-transfer status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-TFTP-MIB::wfTftpDefaultVolume OID value, configure state conditions and alerts, and monitor any Wellfleet/Bay Networks multiprotocol router (TFTP server enable/active-transfer status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.18 | wellfleet | CMU-MIB |
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5 | wfApplication | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3 | wfInternet | Wellfleet-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.6 | wfTftp | Wellfleet-TFTP-MIB |
| 1.3.6.1.4.1.18.3.5.3.6.2 | wfTftpDefaultVolume | Wellfleet-TFTP-MIB |