Wellfleet-SYNC-MIB :: wfSyncExternalClkSpeed

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Wellfleet-SYNC-MIB › wfSyncExternalClkSpeed

wfSyncExternalClkSpeed

Module: Wellfleet-SYNC-MIB

OID (symbolic): Wellfleet-SYNC-MIB::wfSyncExternalClkSpeed

OID (numeric): 1.3.6.1.4.1.18.3.4.5.1.93

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: External Clock Speed. If external clocking is configured, this attribute should be set to the clock speed of the externally supplied clock. Depending on the protocols configured on this interface, this value may control internal decision making within the router. In some cases, router software uses this attribute for route selection. If Priority Queuing is configured, it chooses queue depths based on this attribute. This attribute has no effect when Internal clocking is configured.

What is wfSyncExternalClkSpeed?

The expected speed (1200-6,000,000 bps, default 64102) of an externally supplied clock when wfSyncClkSource is set to external; some router software also uses this value for route selection or Priority Queuing depth decisions, and it has no effect if internal clocking is configured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.4.5.1.93
snmpwalk -v2c -c public <target> Wellfleet-SYNC-MIB::wfSyncExternalClkSpeed

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.4.5.1.93.1
snmpget -v2c -c public <target> Wellfleet-SYNC-MIB::wfSyncExternalClkSpeed.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.18.3.4.5.1.93.1 i <value>

Start monitoring Wellfleet router, Bay Networks router with synchronous serial WAN interface (clock-source/sync error-counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-SYNC-MIB::wfSyncExternalClkSpeed OID value, configure state conditions and alerts, and monitor any Wellfleet router, Bay Networks router with synchronous serial WAN interface (clock-source/sync error-counter status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.18wellfleetCMU-MIB
1.3.6.1.4.1.18.3wfSwSeries7Wellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.4wfLineWellfleet-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.18.3.4.5wfSyncTableWellfleet-SYNC-MIB
1.3.6.1.4.1.18.3.4.5.1wfSyncEntryWellfleet-SYNC-MIB
1.3.6.1.4.1.18.3.4.5.1.93wfSyncExternalClkSpeedWellfleet-SYNC-MIB