All MIBs › Wellfleet-OSPF-MIB › wfOspfBackupLogMask
wfOspfBackupLogMask
Module: Wellfleet-OSPF-MIB
OID (symbolic): Wellfleet-OSPF-MIB::wfOspfBackupLogMask
OID (numeric): 1.3.6.1.4.1.18.3.5.3.2.3.1.14
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: A parameter to specify which OSPF log messages should be logged. This will only effect the Backup OSPF gate. Each bit represents a message as defined below. A 1 in that bit location means to log it a 0 means not to put that log message in the log. Changing this value will NOT restart OSPF, but will take effct immediately(if there are any messages to be logged. bit 31 bit 0 +---------------------------------------+ | | +---------------------------------------+ bit0 Trace Messages bit1 INFO Level messages bit2 debug level messages bit3 OSPF interface state change messages bit4 Nbr state changes bit5 self-origination of LSA's bit6 receipt of new LSA's bit7 changes to OSPF`s Routing Table bit8 Bad LS requests, Ack's, or updates bit9 receipt of less recent LSA's bit10 receipt of more recent self-originated LSA's bit11 receipt of MAxAge LSA's (i.e. LSA's being flushed) bit12 - 31 reserved
What is wfOspfBackupLogMask?
Reports the log-message bitmask currently in effect for the Backup OSPF soloist, using the same per-bit message categories (trace, debug, interface/neighbor state changes, LSA events, etc.) as wfOspfPrimaryLogMask. Because the field is read-only here, it reflects the backup gate's active logging configuration rather than something the admin sets directly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.2.3.1.14 snmpwalk -v2c -c public <target> Wellfleet-OSPF-MIB::wfOspfBackupLogMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.2.3.1.14.1 snmpget -v2c -c public <target> Wellfleet-OSPF-MIB::wfOspfBackupLogMask.1
Start monitoring Wellfleet/Bay Networks routers (OSPF neighbor-adjacency/LSA-database status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-OSPF-MIB::wfOspfBackupLogMask OID value, configure state conditions and alerts, and monitor any Wellfleet/Bay Networks routers (OSPF neighbor-adjacency/LSA-database status) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.18 | wellfleet | CMU-MIB |
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5 | wfApplication | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3 | wfInternet | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3.2 | wfIpRouting | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3.2.3 | wfOspfGroup | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.3.2.3.1 | wfOspfGeneralGroup | RFC7777-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.2.3.1.14 | wfOspfBackupLogMask | Wellfleet-OSPF-MIB |