Wellfleet-IPV6-MIB :: wfIpv6RoutePolicy

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Wellfleet-IPV6-MIB › wfIpv6RoutePolicy

wfIpv6RoutePolicy

Module: Wellfleet-IPV6-MIB

OID (symbolic): Wellfleet-IPV6-MIB::wfIpv6RoutePolicy

OID (numeric): 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by wfIpv6RouteProtocol specified otherwise, the policy specifier is the Priority field of the IPv6 packet header. The encoding of IPv6 Priority is specified by the following convention:

0 - uncharacterized traffic 1 - 'filler' traffic (e.g., netnews) 2 - unattended data transfer (e.g., email) 3 - reserved 4 - attended bulk transfer (e.g., FTP, NFS) 5 - reserved 6 - interactive traffic (e.g., telnet, X) 7 - internet control traffic (e.g., routing protocols, SNMP)

Protocols defining 'policy' otherwise must either define a set of values which are valid for this object or must implement an integer- instanced policy table for which this object's value acts as an index.

What is wfIpv6RoutePolicy?

The multipath route-selection policy value for this entry; unless the specific routing protocol in wfIpv6RouteProtocol defines otherwise, this is the IPv6 traffic-class/priority field (0-7, e.g. 0=uncharacterized, 4=attended bulk transfer, 7=internet control traffic) used to choose among several candidate next hops for the same destination.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.8
snmpwalk -v2c -c public <target> Wellfleet-IPV6-MIB::wfIpv6RoutePolicy

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.8.1
snmpget -v2c -c public <target> Wellfleet-IPV6-MIB::wfIpv6RoutePolicy.1

Start monitoring Wellfleet/Bay Networks routers running IPv6 (neighbor-discovery/routing-table status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-IPV6-MIB::wfIpv6RoutePolicy OID value, configure state conditions and alerts, and monitor any Wellfleet/Bay Networks routers running IPv6 (neighbor-discovery/routing-table status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.18wellfleetCMU-MIB
1.3.6.1.4.1.18.3wfSwSeries7Wellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5wfApplicationWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5.3wfInternetWellfleet-COMMON-MIB
1.3.6.1.4.1.18.3.5.3.16wfIpv6GroupWellfleet-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.18.3.5.3.16.1wfIpv6RoutingGroupWellfleet-IPV6-MIB
1.3.6.1.4.1.18.3.5.3.16.1.1wfIpv6RoutingGeneralGroupWellfleet-IPV6-MIB
1.3.6.1.4.1.18.3.5.3.16.1.1.8wfIpv6RouteTableWellfleet-IPV6-MIB
1.3.6.1.4.1.18.3.5.3.16.1.1.8.1wfIpv6RouteEntryWellfleet-IPV6-MIB
1.3.6.1.4.1.18.3.5.3.16.1.1.8.1.8wfIpv6RoutePolicyWellfleet-IPV6-MIB