All MIBs › Wellfleet-DECNET-MIB › wfivAdjState
wfivAdjState
Module: Wellfleet-DECNET-MIB
OID (symbolic): Wellfleet-DECNET-MIB::wfivAdjState
OID (numeric): 1.3.6.1.4.1.18.3.5.2.5.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: 'This value indicates the state of a router adjacency. On adjacencies over a circuit of type (wfivCircuitCommonType) Ethernet, CI, or FDDI, with an adjacent node of type (wfivAdjType) ROUTING IV or AREA, this variable is the state of the Ethernet Initialization Layer for this adjacency, and can have values INITIALIZING or UP. (See Section 9.1.1 of DECnet Phase IV Routing Layer Functional Specification.)
On adjacencies over a circuit of type (wfivCircuitCommonType) Ethernet, CI, or FDDI, with an adjacent node of type (wfivAdjType) NONROUTING IV, this varaible will always take on the value UP.
On adjacencies over a circuit of type (wfivCircuitCommonType) DDCMP POINT, DDCMP CONTROL, DDCMP TRIBUTARY, DDCMP DMC, or X.25, this variable is the state of the Routing Layer Initialization Circuit State. (See section 7.3, ibid.) It can have values between RUN and HALT.
On adjacencies over a circuit of type (wfivCircuitCommonType) OTHER, this variable may be used in a manner consistent with the Initialization Layer used on that circuit. INITIALIZING (1), -- Ethernet one-way UP (2), -- Ethernet two-way RUN (3), -- The eight DDCMP/X.25 states CIRCUIT REJECTED (4), DATA LINK START (5), ROUTING LAYER INITIALIZE (6), ROUTING LAYER VERIFY (7), ROUTING LAYER COMPLETE (8), OFF (9), HALT (10)'
What is wfivAdjState?
Reports the state of this router adjacency; on Ethernet/CI/FDDI circuits it reflects the Ethernet Initialization Layer's state (INITIALIZING or UP), while on DDCMP/X.25 circuits it reflects the Routing Layer Initialization Circuit State.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.18.3.5.2.5.1.7 snmpwalk -v2c -c public <target> Wellfleet-DECNET-MIB::wfivAdjState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.18.3.5.2.5.1.7.1 snmpget -v2c -c public <target> Wellfleet-DECNET-MIB::wfivAdjState.1
Start monitoring Wellfleet/Bay Networks routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Wellfleet-DECNET-MIB::wfivAdjState OID value, configure state conditions and alerts, and monitor any Wellfleet/Bay Networks routers from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.18 | wellfleet | CMU-MIB |
| 1.3.6.1.4.1.18.3 | wfSwSeries7 | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5 | wfApplication | Wellfleet-COMMON-MIB |
| 1.3.6.1.4.1.18.3.5.2 | wfDecGroup | Wellfleet-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.18.3.5.2.5 | wfivAdjTable | Wellfleet-DECNET-MIB |
| 1.3.6.1.4.1.18.3.5.2.5.1 | wfivAdjEntry | Wellfleet-DECNET-MIB |
| 1.3.6.1.4.1.18.3.5.2.5.1.7 | wfivAdjState | Wellfleet-DECNET-MIB |