All MIBs › WebGraph-Thermo-Hygrometer-US-MIB › wtWebioAn1MailEnable
wtWebioAn1MailEnable
Module: WebGraph-Thermo-Hygrometer-US-MIB
OID (symbolic): WebGraph-Thermo-Hygrometer-US-MIB::wtWebioAn1MailEnable
OID (numeric): 1.3.6.1.4.1.5040.1.2.9.3.1.3.3.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
What is wtWebioAn1MailEnable?
The bit that enables the device to actually send outgoing alert/report emails (Set this bit to enable the sending of mails, per the source DESCRIPTION). Note: despite its Webio/An1 naming (apparently carried over from a different W&T analog-input product line's MIB rather than renamed for this Thermo-Hygrometer module), it sits at { wtWebGraphThermHygroMail 4 } directly between MailServer and MailAuthentication, so it is genuinely this device's global mail-enable switch, not a leftover from another device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.9.3.1.3.3.4 snmpwalk -v2c -c public <target> WebGraph-Thermo-Hygrometer-US-MIB::wtWebioAn1MailEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.9.3.1.3.3.4.1 snmpget -v2c -c public <target> WebGraph-Thermo-Hygrometer-US-MIB::wtWebioAn1MailEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.9.3.1.3.3.4.1 s <value>
Start monitoring WebGraph networked thermo-hygrometer environmental sensor appliance (temperature/humidity reading/alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-Thermo-Hygrometer-US-MIB::wtWebioAn1MailEnable OID value, configure state conditions and alerts, and monitor any WebGraph networked thermo-hygrometer environmental sensor appliance (temperature/humidity reading/alarm status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.9 | wtWebGraphThermHygro | WebGraph-OLD-Thermo-Hygrometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.9.3 | wtWebGraphThermHygroConfig | WebGraph-OLD-Thermo-Hygrometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.9.3.1 | wtWebGraphThermHygroDevice | WebGraph-OLD-Thermo-Hygrometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.9.3.1.3 | wtWebGraphThermHygroBasic | WebGraph-OLD-Thermo-Hygrometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.9.3.1.3.3 | wtWebGraphThermHygroMail | WebGraph-OLD-Thermo-Hygrometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.9.3.1.3.3.4 | wtWebioAn1MailEnable | WebGraph-Thermo-Hygrometer-US-MIB |