All MIBs › WebGraph-AnalogIn-57644-US-MIB › wtWebGraphAnalogIn57644SessCntrlConfigMode
wtWebGraphAnalogIn57644SessCntrlConfigMode
Module: WebGraph-AnalogIn-57644-US-MIB
OID (symbolic): WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644SessCntrlConfigMode
OID (numeric): 1.3.6.1.4.1.5040.1.2.12.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
What is wtWebGraphAnalogIn57644SessCntrlConfigMode?
This reports whether the device is currently in SNMP configuration mode: 1 if a session is open and settings can be written, 0 otherwise. If an admin writes the correct password but this still reads 0, per the description someone else already has a session open, so the device stays read-only for this manager until that session closes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.12.2.2 snmpwalk -v2c -c public <target> WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644SessCntrlConfigMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.12.2.2.1 snmpget -v2c -c public <target> WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644SessCntrlConfigMode.1
Start monitoring WebGraph/WebTech model 57644 analog input environmental monitoring unit (per-channel reading/binary-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644SessCntrlConfigMode OID value, configure state conditions and alerts, and monitor any WebGraph/WebTech model 57644 analog input environmental monitoring unit (per-channel reading/binary-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.12 | wtWebGraphAnalogIn57643 | WebGraph-AnalogIn-57643-US-MIB |
| 1.3.6.1.4.1.5040.1.2.12.2 | wtWebGraphAnalogIn57643SessCntrl | WebGraph-AnalogIn-57643-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.12.2.2 | wtWebGraphAnalogIn57644SessCntrlConfigMode | WebGraph-AnalogIn-57644-US-MIB |