All MIBs › WebGraph-AnalogIn-57644-US-MIB › wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel
wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel
Module: WebGraph-AnalogIn-57644-US-MIB
OID (symbolic): WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel
OID (numeric): 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
What is wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel?
This is a 4-byte bit-coded field in the last octet selecting which of up to 8 sensors are shown in the graphical chart (bit 0 for Sensor 1 through bit 7 for Sensor 8). This is the extended, 8-sensor version of wtWebGraphAnalogIn57644DisplaySensorSel, used on device variants or firmware supporting more than the base 2 sensors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1 snmpwalk -v2c -c public <target> WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1.1 snmpget -v2c -c public <target> WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1.1 s <value>
Start monitoring WebGraph/WebTech model 57644 analog input environmental monitoring unit (per-channel reading/binary-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIn-57644-US-MIB::wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel OID value, configure state conditions and alerts, and monitor any WebGraph/WebTech model 57644 analog input environmental monitoring unit (per-channel reading/binary-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| 1.3.6.1.4.1.5040.1.2.12 | wtWebGraphAnalogIn57643 | WebGraph-AnalogIn-57643-US-MIB |
| 1.3.6.1.4.1.5040.1.2.12.3 | wtWebGraphAnalogIn57643Config | WebGraph-AnalogIn-57643-US-MIB |
| 1.3.6.1.4.1.5040.1.2.12.3.1 | wtWebGraphAnalogIn57643Device | WebGraph-AnalogIn-57643-US-MIB |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6 | wtWebGraphAnalogIn57643Graphics | WebGraph-AnalogIn-57643-US-MIB |
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2 | wtWebGraphAnalogIn57643GraphicsSelect | WebGraph-AnalogIn-57643-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1 | wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel | WebGraph-AnalogIn-57644-US-MIB |