All MIBs › WebGraph-AnalogIO-57662-US-MIB › wtWebGraphAnalog57662SnmpEnable
wtWebGraphAnalog57662SnmpEnable
Module: WebGraph-AnalogIO-57662-US-MIB
OID (symbolic): WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662SnmpEnable
OID (numeric): 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
What is wtWebGraphAnalog57662SnmpEnable?
Read-write bitmask where bit 0 turns SNMP support on or off entirely (the device won't answer any SNMP request if cleared) and bit 1 controls whether the read community string is also checked against the system password. Admins disable SNMP entirely (clear bit 0) on units where only the web interface should be used, hardening the device's management surface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5 snmpwalk -v2c -c public <target> WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662SnmpEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5.1 snmpget -v2c -c public <target> WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662SnmpEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wtWebGraphAnalog57662SnmpEnable.1
Start monitoring WebGraph model 57662 analog/binary I/O monitoring unit (per-channel sensor reading/binary I/O status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662SnmpEnable OID value, configure state conditions and alerts, and monitor any WebGraph model 57662 analog/binary I/O monitoring unit (per-channel sensor reading/binary I/O status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.29 | wtWebGraphAnalog57662 | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3 | wtWebGraphAnalog57662Config | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1 | wtWebGraphAnalog57662Device | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3 | wtWebGraphAnalog57662Basic | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4 | wtWebGraphAnalog57662SNMP | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5 | wtWebGraphAnalog57662SnmpEnable | WebGraph-AnalogIO-57662-US-MIB |