All MIBs › WebGraph-AnalogIO-57662-US-MIB › wtWebGraphAnalog57662BinaryTcpClientInputTrigger
wtWebGraphAnalog57662BinaryTcpClientInputTrigger
Module: WebGraph-AnalogIO-57662-US-MIB
OID (symbolic): WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662BinaryTcpClientInputTrigger
OID (numeric): 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1
What is wtWebGraphAnalog57662BinaryTcpClientInputTrigger?
Read-write 4-octet bitmask selecting which analog inputs' state changes trigger an unsolicited data transmission in TCP Client mode (bits 0-1 for analog inputs 0-1); every transmission still carries all input states. Works the same way as wtWebGraphAnalog57662BinaryTcpServerInputTrigger but for this channel's client connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10 snmpwalk -v2c -c public <target> WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662BinaryTcpClientInputTrigger
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10.1 snmpget -v2c -c public <target> WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662BinaryTcpClientInputTrigger.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10.1 s <value>
Start monitoring WebGraph model 57662 analog/binary I/O monitoring unit (per-channel sensor reading/binary I/O status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIO-57662-US-MIB::wtWebGraphAnalog57662BinaryTcpClientInputTrigger OID value, configure state conditions and alerts, and monitor any WebGraph model 57662 analog/binary I/O monitoring unit (per-channel sensor reading/binary I/O status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.29 | wtWebGraphAnalog57662 | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3 | wtWebGraphAnalog57662Config | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1 | wtWebGraphAnalog57662Device | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3 | wtWebGraphAnalog57662Basic | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9 | wtWebGraphAnalog57662Binary | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3 | wtWebGraphAnalog57662BinaryTable | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1 | wtWebGraphAnalog57662BinaryEntry | WebGraph-AnalogIO-57662-US-MIB |
| 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10 | wtWebGraphAnalog57662BinaryTcpClientInputTrigger | WebGraph-AnalogIO-57662-US-MIB |