All MIBs › WebGraph-AnalogIO-57661-US-MIB › wtWebGraphAnalog57661BinaryTcpServerInputTrigger
wtWebGraphAnalog57661BinaryTcpServerInputTrigger
Module: WebGraph-AnalogIO-57661-US-MIB
OID (symbolic): WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpServerInputTrigger
OID (numeric): 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1
What is wtWebGraphAnalog57661BinaryTcpServerInputTrigger?
A bitmask (bits 0-1 for the two analog inputs) selecting which sensor's state change automatically triggers a data push to the connected TCP client in server mode; every push still reports all channels' states, but only marked inputs act as the trigger, reducing unnecessary traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3 snmpwalk -v2c -c public <target> WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpServerInputTrigger
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3.1 snmpget -v2c -c public <target> WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpServerInputTrigger.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3.1 s <value>
Start monitoring WebGraph model 57661 analog I/O module (analog-channel reading/binary-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpServerInputTrigger OID value, configure state conditions and alerts, and monitor any WebGraph model 57661 analog I/O module (analog-channel reading/binary-threshold status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.28 | wtWebGraphAnalog57661 | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3 | wtWebGraphAnalog57661Config | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1 | wtWebGraphAnalog57661Device | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3 | wtWebGraphAnalog57661Basic | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9 | wtWebGraphAnalog57661Binary | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3 | wtWebGraphAnalog57661BinaryTable | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1 | wtWebGraphAnalog57661BinaryEntry | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3 | wtWebGraphAnalog57661BinaryTcpServerInputTrigger | WebGraph-AnalogIO-57661-US-MIB |