All MIBs › WebGraph-AnalogIO-57661-US-MIB › wtWebGraphAnalog57661BinaryTcpClientInputTrigger
wtWebGraphAnalog57661BinaryTcpClientInputTrigger
Module: WebGraph-AnalogIO-57661-US-MIB
OID (symbolic): WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpClientInputTrigger
OID (numeric): 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1
What is wtWebGraphAnalog57661BinaryTcpClientInputTrigger?
A bitmask (bits 0-1 for the two analog inputs) selecting which sensor's change of state triggers a data transmission to the remote server in TCP Client mode, mirroring wtWebGraphAnalog57661BinaryTcpServerInputTrigger for the client-side channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10 snmpwalk -v2c -c public <target> WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpClientInputTrigger
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10.1 snmpget -v2c -c public <target> WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpClientInputTrigger.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10.1 s <value>
Start monitoring WebGraph model 57661 analog I/O module (analog-channel reading/binary-threshold status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WebGraph-AnalogIO-57661-US-MIB::wtWebGraphAnalog57661BinaryTcpClientInputTrigger OID value, configure state conditions and alerts, and monitor any WebGraph model 57661 analog I/O module (analog-channel reading/binary-threshold status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5040 | wut | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1 | wtComServer | Com-Server-Intern-MIB |
| 1.3.6.1.4.1.5040.1.2 | wtWebio | WebGraph-8xThermometer-US-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5040.1.2.28 | wtWebGraphAnalog57661 | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3 | wtWebGraphAnalog57661Config | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1 | wtWebGraphAnalog57661Device | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3 | wtWebGraphAnalog57661Basic | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9 | wtWebGraphAnalog57661Binary | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3 | wtWebGraphAnalog57661BinaryTable | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1 | wtWebGraphAnalog57661BinaryEntry | WebGraph-AnalogIO-57661-US-MIB |
| 1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10 | wtWebGraphAnalog57661BinaryTcpClientInputTrigger | WebGraph-AnalogIO-57661-US-MIB |