WWP-LEOS-LDP-MIB :: wwpLeosLdpSessionPeerHoldTime

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WWP-LEOS-LDP-MIB › wwpLeosLdpSessionPeerHoldTime

wwpLeosLdpSessionPeerHoldTime

Module: WWP-LEOS-LDP-MIB

OID (symbolic): WWP-LEOS-LDP-MIB::wwpLeosLdpSessionPeerHoldTime

OID (numeric): 1.3.6.1.4.1.6141.2.60.32.1.2.1.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The peer's advertised keepalive hold time for this session in seconds. Note that the value of this field reflects the peer's configuration at the time of session initialization; this may differ from the configuration that would apply to a new session, if the peer's configuration has changed since this session was initialized.

What is wwpLeosLdpSessionPeerHoldTime?

This object reports the keepalive hold time, in seconds, that the remote LDP peer advertised when this session was established. Admins compare this to the local configured hold time to understand which side's value ultimately determined the negotiated session timeout. For example, if the peer advertised 45 seconds while the local device proposed 30, an admin reviewing this object would see the peer's more conservative value reflected here.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.32.1.2.1.1.5
snmpwalk -v2c -c public <target> WWP-LEOS-LDP-MIB::wwpLeosLdpSessionPeerHoldTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.32.1.2.1.1.5.1
snmpget -v2c -c public <target> WWP-LEOS-LDP-MIB::wwpLeosLdpSessionPeerHoldTime.1

Start monitoring Ciena/WWP LEOS MPLS/Ethernet transport switch (LDP session/hello-adjacency status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-LDP-MIB::wwpLeosLdpSessionPeerHoldTime OID value, configure state conditions and alerts, and monitor any Ciena/WWP LEOS MPLS/Ethernet transport switch (LDP session/hello-adjacency status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6141wwpWWP-SMI
1.3.6.1.4.1.6141.2wwpModulesWWP-SMI
1.3.6.1.4.1.6141.2.60wwpModulesLeosWWP-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6141.2.60.32wwpLeosLdpMIBWWP-LEOS-LDP-MIB
1.3.6.1.4.1.6141.2.60.32.1wwpLeosLdpMIBObjectsWWP-LEOS-LDP-MIB
1.3.6.1.4.1.6141.2.60.32.1.2wwpLeosLdpWWP-LEOS-LDP-MIB
1.3.6.1.4.1.6141.2.60.32.1.2.1wwpLeosLdpSessionTableWWP-LEOS-LDP-MIB
1.3.6.1.4.1.6141.2.60.32.1.2.1.1wwpLeosLdpSessionEntryWWP-LEOS-LDP-MIB
1.3.6.1.4.1.6141.2.60.32.1.2.1.1.5wwpLeosLdpSessionPeerHoldTimeWWP-LEOS-LDP-MIB