All MIBs › WWP-LEOS-FILE-TRANSFER-MIB › wwpLeosFTransferServerInetAddr
wwpLeosFTransferServerInetAddr
Module: WWP-LEOS-FILE-TRANSFER-MIB
OID (symbolic): WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerInetAddr
OID (numeric): 1.3.6.1.4.1.6141.2.60.23.1.1.12
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-write
Description: The Inet address of the TFTP server from (or to) which to transfer the file. Address must be a unicast address that is reachable from the agent and no firewalls or ACLs preventing TFTP datagrams from being transferred. This OID must be used in conjuction with wwpLeosFTransferServerInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosFTransferServerAddr is set ot 0.0.0.0.
What is wwpLeosFTransferServerInetAddr?
This read-write InetAddress object specifies the address, IPv4 or IPv6 per wwpLeosFTransferServerInetAddrType, of the TFTP server for the next file transfer; it must be a unicast address reachable from the agent with nothing blocking TFTP traffic, and setting it resets wwpLeosFTransferServerAddr to 0.0.0.0. An admin uses this object instead of wwpLeosFTransferServerAddr specifically when the TFTP server has an IPv6 address, since the older object only supports IPv4. For example, an admin sets wwpLeosFTransferServerInetAddrType to ipv6 and wwpLeosFTransferServerInetAddr to the server's IPv6 address to download a firmware image over an IPv6-only management network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.23.1.1.12 snmpwalk -v2c -c public <target> WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerInetAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.23.1.1.12.1 snmpget -v2c -c public <target> WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerInetAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.23.1.1.12.1 s <value>
Start monitoring Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (TFTP/FTP transfer-state/result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerInetAddr OID value, configure state conditions and alerts, and monitor any Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (TFTP/FTP transfer-state/result status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.23 | wwpLeosFileTransferMIB | WWP-LEOS-FILE-TRANSFER-MIB |
| 1.3.6.1.4.1.6141.2.60.23.1 | wwpLeosFileTransferMIBObjects | WWP-LEOS-FILE-TRANSFER-MIB |
| 1.3.6.1.4.1.6141.2.60.23.1.1 | wwpLeosFileTransfer | WWP-LEOS-FILE-TRANSFER-MIB |
| 1.3.6.1.4.1.6141.2.60.23.1.1.12 | wwpLeosFTransferServerInetAddr | WWP-LEOS-FILE-TRANSFER-MIB |