All MIBs › WWP-LEOS-FILE-TRANSFER-MIB › wwpLeosFTransferServerAddr
wwpLeosFTransferServerAddr
Module: WWP-LEOS-FILE-TRANSFER-MIB
OID (symbolic): WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerAddr
OID (numeric): 1.3.6.1.4.1.6141.2.60.23.1.1.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The IP address of the TFTP server from (or to) which to transfer the file.Address must be a unicast address that is reachable from the agent and no firewalls or ACLs preventing TFTP datagrams from being transferred. wwpLeosFTransferServerInetAddr cannot be set at the same time. This OID will be set to 0.0.0.0 when the server has an IPv6 address, which is shown in the wwpLeosFTransferServerInetAddr and the wwpLeosDnsServerInetAddrType is set to ipv6. For a server with an IPv4 address, the ip address will be shown in this OID and the wwpLeosFTransferServerInetAddr with the wwpLeosDnsServerInetAddrType set to ipv4.
What is wwpLeosFTransferServerAddr?
This read-write IpAddress object specifies the IPv4 address of the TFTP server to or from which a file transfer will occur, and must be a unicast address reachable from the agent with no firewall or ACL blocking TFTP traffic. It is mutually exclusive with wwpLeosFTransferServerInetAddr: this object reads 0.0.0.0 whenever the configured server is actually IPv6 and its address appears instead in the InetAddr object. For example, an admin sets wwpLeosFTransferServerAddr to 10.1.1.5 to point the next file transfer at an IPv4 TFTP host on the management network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.23.1.1.2 snmpwalk -v2c -c public <target> WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6141.2.60.23.1.1.2.1 snmpget -v2c -c public <target> WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6141.2.60.23.1.1.2.1 a <value>
Start monitoring Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (TFTP/FTP transfer-state/result status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WWP-LEOS-FILE-TRANSFER-MIB::wwpLeosFTransferServerAddr OID value, configure state conditions and alerts, and monitor any Ciena/WWP LEOS-based Ethernet switches, metro Ethernet access/aggregation devices (TFTP/FTP transfer-state/result status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6141 | wwp | WWP-SMI |
| 1.3.6.1.4.1.6141.2 | wwpModules | WWP-SMI |
| 1.3.6.1.4.1.6141.2.60 | wwpModulesLeos | WWP-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6141.2.60.23 | wwpLeosFileTransferMIB | WWP-LEOS-FILE-TRANSFER-MIB |
| 1.3.6.1.4.1.6141.2.60.23.1 | wwpLeosFileTransferMIBObjects | WWP-LEOS-FILE-TRANSFER-MIB |
| 1.3.6.1.4.1.6141.2.60.23.1.1 | wwpLeosFileTransfer | WWP-LEOS-FILE-TRANSFER-MIB |
| 1.3.6.1.4.1.6141.2.60.23.1.1.2 | wwpLeosFTransferServerAddr | WWP-LEOS-FILE-TRANSFER-MIB |