WTI-RSM-TSM-MIB

All MIBs › WTI-RSM-TSM-MIB

Organization: Western Telematic, Inc.

Last Updated: 2014-01-08

Category: Western Telematic Remote Management

Description: Manages Western Telematic RSM/TSM remote serial console server port configuration and session access control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WTI-RSM-TSM-MIB?

WTI-RSM-TSM-MIB is a Western Telematic Inc. (WTI) proprietary MIB for the RSM/TSM family of remote serial console/terminal server products, which provide out-of-band serial access to other network and data-center equipment. It exposes configuration objects for serial port setup and session access control, governing how administrators reach connected devices' console ports remotely. Its monitoring value centers on software/session status - which serial ports are configured, in use, or access-restricted - making it useful for confirming the console-access infrastructure itself (rather than the target devices behind it) is correctly provisioned and available, an important layer of out-of-band management health. No specific cross-MIB dependency is evident from the available context, though it likely follows WTI's own enterprise MIB conventions for its console server line. It is deployed on WTI RSM/TSM remote console/terminal servers used by data-center and NOC staff for out-of-band access to racked equipment. Engineers can download the WTI-RSM-TSM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WTI-RSM-TSM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Western Telematic Inc. (WTI) RSM/TSM remote serial console server

Monitoring Examples

No concrete object or table names were supplied for this module, so a grounded polling scenario cannot be given; in general, a console-server MIB of this type would let an operator poll per-port configuration and session-access-control objects to confirm which serial console ports are active, in use, or locked down, helping verify out-of-band access paths are available before an emergency console session is needed.

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT alarmBufferThreshold	1.3.6.1.4.1.2634.1.280.11	INTEGER	read-only	State of the Buffer Threshold Alarm (0 = Inactive, 1 = Active)
INT alarmCircuitBreakerOpen	1.3.6.1.4.1.2634.1.280.5	INTEGER	read-only	State of the Circuit Breaker Open Alarm (0 = Inactive, 1 = Active)
INT alarmCommLoss	1.3.6.1.4.1.2634.1.280.6	INTEGER	read-only	State of the Communication Loss Alarm (0 = Inactive, 1 = Active)
INT alarmEmergencyShutoff	1.3.6.1.4.1.2634.1.280.15	INTEGER	read-only	State of the Emergency Shutoff Alarm (0 = Inactive, 1 = Active)
INT alarmInvalidAccessLockout	1.3.6.1.4.1.2634.1.280.9	INTEGER	read-only	State of the Invalid Access Lockout Alarm (0 = Inactive, 1 = Active)
INT alarmLostOptoVoltage	1.3.6.1.4.1.2634.1.280.14	INTEGER	read-only	State of the Lost Voltage (Line Input) Alarm (0 = Inactive, 1 = Active)
INT alarmNoDialtone	1.3.6.1.4.1.2634.1.280.16	INTEGER	read-only	State of the No Dialtone Alarm (0 = Inactive, 1 = Active)
INT alarmOverCurrentCritical	1.3.6.1.4.1.2634.1.280.2	INTEGER	read-only	State of the Over Current Critical Alarm (0 = Inactive, 1 = Active)
INT alarmOverCurrentInitial	1.3.6.1.4.1.2634.1.280.1	INTEGER	read-only	State of the Over Current Initial Alarm (0 = Inactive, 1 = Active)
INT alarmOverTemperatureCritical	1.3.6.1.4.1.2634.1.280.4	INTEGER	read-only	State of the Over Temperature Critical Alarm (0 = Inactive, 1 = Active)
INT alarmOverTemperatureInitial	1.3.6.1.4.1.2634.1.280.3	INTEGER	read-only	State of the Over Temperature Initial Alarm (0 = Inactive, 1 = Active)
INT alarmPingNoAnswer	1.3.6.1.4.1.2634.1.280.8	INTEGER	read-only	State of the Ping No Answer Alarm (0 = Inactive, 1 = Active)
INT alarmPlugCurrent	1.3.6.1.4.1.2634.1.280.13	INTEGER	read-only	State of the Plug Current Alarm (0 = Inactive, 1 = Active)
INT alarmPowerCycle	1.3.6.1.4.1.2634.1.280.10	INTEGER	read-only	State of the Power Cycle Alarm (0 = Inactive, 1 = Active)
alarmTables	1.3.6.1.4.1.2634.1.280
NTF bufferThresholdCrossedClearTrap	1.3.6.1.4.1.2634.1.300.3.0.2			Buffer Threshold Crossed Alarm (Clear)
NTF bufferThresholdCrossedSetTrap	1.3.6.1.4.1.2634.1.300.3.0.1			Buffer Threshold Crossed Alarm
bufferThresholdTraps	1.3.6.1.4.1.2634.1.300.3
NTF circuitBreakerOpenClearTrap	1.3.6.1.4.1.2634.1.300.8.0.2			Circuit Breaker Open Alarm (Clear)
NTF circuitBreakerOpenSetTrap	1.3.6.1.4.1.2634.1.300.8.0.1			Circuit Breaker Open Alarm
circuitBreakerOpenTraps	1.3.6.1.4.1.2634.1.300.8
NTF emergencyShutoffClearTrap	1.3.6.1.4.1.2634.1.300.17.0.2			Emergency Shutoff (Clear)
NTF emergencyShutoffSetTrap	1.3.6.1.4.1.2634.1.300.17.0.1			Emergency Shutoff
emergencyShutoffTraps	1.3.6.1.4.1.2634.1.300.17
STR environmentMacEth0	1.3.6.1.4.1.2634.1.200.10.1.20	DisplayString	read-only	MAC Address Eth0
STR environmentMacEth1	1.3.6.1.4.1.2634.1.200.10.1.21	DisplayString	read-only	MAC Address Eth1
INT environmentSysFlash	1.3.6.1.4.1.2634.1.200.10.1.19	INTEGER	read-only	Total system Flash.
INT environmentSysRAM	1.3.6.1.4.1.2634.1.200.10.1.18	INTEGER	read-only	Total system RAM.
environmentTables	1.3.6.1.4.1.2634.1.200
environmentUnitEntry	1.3.6.1.4.1.2634.1.200.10.1		not-accessible	Row definition for the environment unit table.
INT environmentUnitIndex	1.3.6.1.4.1.2634.1.200.10.1.1	INTEGER	not-accessible	Index for the environment unit table.
STR environmentUnitName	1.3.6.1.4.1.2634.1.200.10.1.2	DisplayString	read-only	The name of the unit.
environmentUnitTable	1.3.6.1.4.1.2634.1.200.10		not-accessible	A table of environment status for units.
INT environmentUnitTemperature	1.3.6.1.4.1.2634.1.200.10.1.3	INTEGER	read-only	The temperature of the unit.
NTF lockoutClearTrap	1.3.6.1.4.1.2634.1.300.12.0.2			Invalid Access Lockout (Clear)
NTF lockoutSetTrap	1.3.6.1.4.1.2634.1.300.12.0.1			Invalid Access Lockout
lockoutTraps	1.3.6.1.4.1.2634.1.300.12
NTF lostCommClearTrap	1.3.6.1.4.1.2634.1.300.9.0.2			Lost Communication with AUX Unit (Clear)
NTF lostCommSetTrap	1.3.6.1.4.1.2634.1.300.9.0.1			Lost Communication with AUX Unit
lostCommTraps	1.3.6.1.4.1.2634.1.300.9
NTF lostOptoVoltageClearTrap	1.3.6.1.4.1.2634.1.300.16.0.2			Lost Voltage (Clear)
NTF lostOptoVoltageSetTrap	1.3.6.1.4.1.2634.1.300.16.0.1			Lost Voltage
lostOptoVoltageTraps	1.3.6.1.4.1.2634.1.300.16
NTF noDialtoneClearTrap	1.3.6.1.4.1.2634.1.300.18.0.2			No Dialtone (Clear)
NTF noDialtoneSetTrap	1.3.6.1.4.1.2634.1.300.18.0.1			No Dialtone
noDialtoneTraps	1.3.6.1.4.1.2634.1.300.18
NTF overCurrentCriticalClearTrap	1.3.6.1.4.1.2634.1.300.5.0.2			Over Current Critical Alarm (Clear)
NTF overCurrentCriticalSetTrap	1.3.6.1.4.1.2634.1.300.5.0.1			Over Current Critical Alarm
overCurrentCriticalTraps	1.3.6.1.4.1.2634.1.300.5
NTF overCurrentInitialClearTrap	1.3.6.1.4.1.2634.1.300.4.0.2			Over Current Initial Alarm (Clear)
NTF overCurrentInitialSetTrap	1.3.6.1.4.1.2634.1.300.4.0.1			Over Current Initial Alarm
overCurrentInitialTraps	1.3.6.1.4.1.2634.1.300.4
NTF overTemperatureCriticalClearTrap	1.3.6.1.4.1.2634.1.300.7.0.2			Over Temperature Critical Alarm (Clear)
NTF overTemperatureCriticalSetTrap	1.3.6.1.4.1.2634.1.300.7.0.1			Over Temperature Critical Alarm
overTemperatureCriticalTraps	1.3.6.1.4.1.2634.1.300.7
NTF overTemperatureInitialClearTrap	1.3.6.1.4.1.2634.1.300.6.0.2			Over Temperature Initial Alarm (Clear)
NTF overTemperatureInitialSetTrap	1.3.6.1.4.1.2634.1.300.6.0.1			Over Temperature Initial Alarm
overTemperatureInitialTraps	1.3.6.1.4.1.2634.1.300.6
NTF pingNoAnswerClearTrap	1.3.6.1.4.1.2634.1.300.11.0.2			Ping No Answer (Clear)
NTF pingNoAnswerSetTrap	1.3.6.1.4.1.2634.1.300.11.0.1			Ping No Answer
pingNoAnswerTraps	1.3.6.1.4.1.2634.1.300.11
INT plugAction	1.3.6.1.4.1.2634.1.100.200.1.4	INTEGER	read-write	Plug action
INT plugCurrent	1.3.6.1.4.1.2634.1.100.200.1.7	INTEGER	read-only	Plug current (In tenths of amps, divide by 10 for value in amps)
NTF plugCurrentClearTrap	1.3.6.1.4.1.2634.1.300.15.0.2			Plug Current (Clear)
NTF plugCurrentSetTrap	1.3.6.1.4.1.2634.1.300.15.0.1			Plug Current
plugCurrentTraps	1.3.6.1.4.1.2634.1.300.15
plugEntry	1.3.6.1.4.1.2634.1.100.200.1		not-accessible	Row definition for the plug table.
INT plugGroupAction	1.3.6.1.4.1.2634.1.100.300.1.3	INTEGER	read-write	Plug group action
INT plugGroupCurrent	1.3.6.1.4.1.2634.1.100.300.1.4	INTEGER	read-only	Plug group current (In tenths of amps, divide by 10 for value in amps)
plugGroupEntry	1.3.6.1.4.1.2634.1.100.300.1		not-accessible	Row definition for the plug group table.
INT plugGroupIndex	1.3.6.1.4.1.2634.1.100.300.1.1	INTEGER	not-accessible	Index for the plug group table.
STR plugGroupName	1.3.6.1.4.1.2634.1.100.300.1.2	DisplayString	read-only	The name of the plug group.
INT plugGroupPower	1.3.6.1.4.1.2634.1.100.300.1.5	INTEGER	read-only	Plug group power (Watts)
plugGroupTable	1.3.6.1.4.1.2634.1.100.300		not-accessible	A table of plug groups.
STR plugID	1.3.6.1.4.1.2634.1.100.200.1.2	DisplayString	read-only	The ID of the plug.
INT plugIndex	1.3.6.1.4.1.2634.1.100.200.1.1	INTEGER	not-accessible	Index for the plug table.
STR plugName	1.3.6.1.4.1.2634.1.100.200.1.5	DisplayString	read-only	The Name of the plug.
INT plugPower	1.3.6.1.4.1.2634.1.100.200.1.8	INTEGER	read-only	Plug power (Watts)
INT plugStatus	1.3.6.1.4.1.2634.1.100.200.1.3	INTEGER	read-only	Plug status
plugTable	1.3.6.1.4.1.2634.1.100.200		not-accessible	A table of plugs.
INT portBufferCt	1.3.6.1.4.1.2634.1.100.100.1.7	INTEGER	read-only	Port byte threshold
INT portBufferThreshold	1.3.6.1.4.1.2634.1.100.100.1.4	INTEGER	read-only	Port buffer threshold
portEntry	1.3.6.1.4.1.2634.1.100.100.1		not-accessible	Row definition for the port table.
STR portID	1.3.6.1.4.1.2634.1.100.100.1.2	DisplayString	read-only	The ID of the port.
INT portIndex	1.3.6.1.4.1.2634.1.100.100.1.1	INTEGER	not-accessible	Index for the port table.
STR portName	1.3.6.1.4.1.2634.1.100.100.1.3	DisplayString	read-only	The name of the port.
STR portStatus	1.3.6.1.4.1.2634.1.100.100.1.6	DisplayString	read-write	The status of the port.
portTable	1.3.6.1.4.1.2634.1.100.100		not-accessible	A table of ports.
STR portUserName	1.3.6.1.4.1.2634.1.100.100.1.5	DisplayString	read-only	The name of the user logged in to port
NTF powercycleSetTrap	1.3.6.1.4.1.2634.1.300.13.0.1			Power Cycle
powercycleTraps	1.3.6.1.4.1.2634.1.300.13
rsm_tsm	1.3.6.1.4.1.2634.1			This is the MIB module for the RSM/TSM
systemTables	1.3.6.1.4.1.2634.1.100
NTF testTrap	1.3.6.1.4.1.2634.1.300.2.0.1			A test trap
testTraps	1.3.6.1.4.1.2634.1.300.2
STR trapInfo	1.3.6.1.4.1.2634.1.300.1	DisplayString	read-only	Alarm information
INT userAccessLevel	1.3.6.1.4.1.2634.1.100.400.1.4	INTEGER	read-write	Users access level
STR userCallbackNum	1.3.6.1.4.1.2634.1.100.400.1.16	DisplayString	read-write	Callback number.
userEntry	1.3.6.1.4.1.2634.1.100.400.1		not-accessible	Row definition for the user table.
STR userGroupAccess	1.3.6.1.4.1.2634.1.100.400.1.10	DisplayString	read-write	Access to plug groups.
INT userIndex	1.3.6.1.4.1.2634.1.100.400.1.1	INTEGER	not-accessible	Index for the user table.
STR userName	1.3.6.1.4.1.2634.1.100.400.1.2	DisplayString	read-write	The name of the user.
INT userOutboundTelAccess	1.3.6.1.4.1.2634.1.100.400.1.14	INTEGER	read-write	Access to outbound telnet.
STR userPasswd	1.3.6.1.4.1.2634.1.100.400.1.3	DisplayString	read-write	The password of the user.
STR userPlugAccess	1.3.6.1.4.1.2634.1.100.400.1.6	DisplayString	read-write	Access to plugs.
STR userPortAccess	1.3.6.1.4.1.2634.1.100.400.1.5	DisplayString	read-write	Access to ports.
INT userSerialAccess	1.3.6.1.4.1.2634.1.100.400.1.11	INTEGER	read-write	Access to serial interface.
INT userSubmit	1.3.6.1.4.1.2634.1.100.400.1.31	INTEGER	read-write	Submit changes to user.
userTable	1.3.6.1.4.1.2634.1.100.400		not-accessible	A table of users.
INT userTelnetSshAccess	1.3.6.1.4.1.2634.1.100.400.1.12	INTEGER	read-write	Access to Telnet/SSH interface.
INT userWebAccess	1.3.6.1.4.1.2634.1.100.400.1.13	INTEGER	read-write	Access to web interface.
westernTelematic	1.3.6.1.4.1.2634
wtiTraps	1.3.6.1.4.1.2634.1.300

RFC description

Vendor-private MIB for WTI Remote Site Manager (RSM) and Temperature Sensor Module (TSM), providing objects for power, environment, and remote access control.

Start monitoring Western Telematic Inc. (WTI) RSM/TSM remote serial console server (serial-port config/session-access status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WTI-RSM-TSM-MIB

What Is WTI-RSM-TSM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description