WTI-MPC-MIB

All MIBs › WTI-MPC-MIB

Organization: Western Telematic, Inc.

Last Updated: 2008-12-17

Category: Western Telematic Remote Management

Description: Manages Western Telematic MPC remote power management unit outlet switching, monitoring, and access control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WTI-MPC-MIB?

This is a Western Telematic Inc. (WTI) vendor MIB for the MPC series remote power management/PDU (power distribution unit) product, managing individually switched AC outlets for remote power cycling of connected equipment. It exposes outlet control (on/off/reboot switching) and status data, along with access control configuration for who may operate the unit remotely. It is squarely a hardware-status and hardware-control MIB — outlet state monitoring reveals whether connected equipment currently has power, and remote switching allows an administrator to power-cycle a hung device, making it valuable for out-of-band recovery of rack equipment. No specific external MIB dependency is evident from the available description; this is a self-contained proprietary power-management MIB. It is typically deployed in data center or NOC racks where WTI MPC units provide remote-hands power cycling capability for servers, network gear, or other equipment that has become unresponsive. Engineers can download the WTI-MPC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WTI-MPC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Western Telematic MPC remote power management unit (PDU)

Monitoring Examples

No object/table names were provided for this MIB, so a concrete polling example using grounded object names cannot be given; in general an administrator would poll per-outlet status objects to confirm which outlets are on/off and use outlet control objects to remotely power-cycle equipment attached to a specific outlet, but the exact object names are not present in the available data.

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF circuitBreakerOpenClearTrap	1.3.6.1.4.1.2634.3.300.8.0.2			Circuit Breaker Open Alarm (Clear)
NTF circuitBreakerOpenSetTrap	1.3.6.1.4.1.2634.3.300.8.0.1			Circuit Breaker Open Alarm
circuitBreakerOpenTraps	1.3.6.1.4.1.2634.3.300.8
INT environmentBranchATotalCurrent	1.3.6.1.4.1.2634.3.200.20	INTEGER	read-only	Total Current on BRANCH A (In tenths of amps, divide by 10 for value in amps).
INT environmentBranchATotalPower	1.3.6.1.4.1.2634.3.200.30	INTEGER	read-only	Total Power on BRANCH A.
INT environmentBranchBTotalCurrent	1.3.6.1.4.1.2634.3.200.40	INTEGER	read-only	Total Current on BRANCH B (In tenths of amps, divide by 10 for value in amps).
INT environmentBranchBTotalPower	1.3.6.1.4.1.2634.3.200.50	INTEGER	read-only	Total Power on BRANCH B.
INT environmentBranchCTotalCurrent	1.3.6.1.4.1.2634.3.200.51	INTEGER	read-only	Total Current on BRANCH C (In tenths of amps, divide by 10 for value in amps).
INT environmentBranchCTotalPower	1.3.6.1.4.1.2634.3.200.52	INTEGER	read-only	Total Power on BRANCH C.
INT environmentBranchDTotalCurrent	1.3.6.1.4.1.2634.3.200.53	INTEGER	read-only	Total Current on BRANCH D (In tenths of amps, divide by 10 for value in amps).
INT environmentBranchDTotalPower	1.3.6.1.4.1.2634.3.200.54	INTEGER	read-only	Total Power on BRANCH D.
STR environmentMonthlyPowerLog	1.3.6.1.4.1.2634.3.200.80	DisplayString	read-only	The monthly power usage log
INT environmentSystemTotalCurrent	1.3.6.1.4.1.2634.3.200.60	INTEGER	read-only	Total current for system (In tenths of amps, divide by 10 for value in amps).
INT environmentSystemTotalPower	1.3.6.1.4.1.2634.3.200.70	INTEGER	read-only	Total power on system.
environmentTables	1.3.6.1.4.1.2634.3.200
INT environmentUnitCurrentA	1.3.6.1.4.1.2634.3.200.10.1.4	INTEGER	read-only	The number of amps in branch A for unit (In tenths of amps, divide by 10 for value in amps).
INT environmentUnitCurrentB	1.3.6.1.4.1.2634.3.200.10.1.7	INTEGER	read-only	The number of amps in branch B for unit (In tenths of amps, divide by 10 for value in amps).
INT environmentUnitCurrentC	1.3.6.1.4.1.2634.3.200.10.1.10	INTEGER	read-only	The number of amps in branch C for unit (In tenths of amps, divide by 10 for value in amps).
INT environmentUnitCurrentD	1.3.6.1.4.1.2634.3.200.10.1.13	INTEGER	read-only	The number of amps in branch D for unit (In tenths of amps, divide by 10 for value in amps).
environmentUnitEntry	1.3.6.1.4.1.2634.3.200.10.1		not-accessible	Row definition for the environment unit table.
INT environmentUnitIndex	1.3.6.1.4.1.2634.3.200.10.1.1	INTEGER	not-accessible	Index for the environment unit table.
STR environmentUnitName	1.3.6.1.4.1.2634.3.200.10.1.2	DisplayString	read-only	The name of the unit.
INT environmentUnitPowerA	1.3.6.1.4.1.2634.3.200.10.1.6	INTEGER	read-only	The number of watts used by branch A for unit.
INT environmentUnitPowerB	1.3.6.1.4.1.2634.3.200.10.1.9	INTEGER	read-only	The number of watts used by branch b for unit.
INT environmentUnitPowerC	1.3.6.1.4.1.2634.3.200.10.1.12	INTEGER	read-only	The number of watts used by branch c for unit.
INT environmentUnitPowerD	1.3.6.1.4.1.2634.3.200.10.1.15	INTEGER	read-only	The number of watts used by branch d for unit.
environmentUnitTable	1.3.6.1.4.1.2634.3.200.10		not-accessible	A table of environment status for units.
INT environmentUnitTemperature	1.3.6.1.4.1.2634.3.200.10.1.3	INTEGER	read-only	The name of the unit.
INT environmentUnitVoltageA	1.3.6.1.4.1.2634.3.200.10.1.5	INTEGER	read-only	The voltage of branch A for unit.
INT environmentUnitVoltageB	1.3.6.1.4.1.2634.3.200.10.1.8	INTEGER	read-only	The voltage of branch B for unit.
INT environmentUnitVoltageC	1.3.6.1.4.1.2634.3.200.10.1.11	INTEGER	read-only	The voltage of branch C for unit.
INT environmentUnitVoltageD	1.3.6.1.4.1.2634.3.200.10.1.14	INTEGER	read-only	The voltage of branch D for unit.
NTF lockoutClearTrap	1.3.6.1.4.1.2634.3.300.12.0.2			Invalid Access Lockout (Clear)
NTF lockoutSetTrap	1.3.6.1.4.1.2634.3.300.12.0.1			Invalid Access Lockout
lockoutTraps	1.3.6.1.4.1.2634.3.300.12
NTF lostCommClearTrap	1.3.6.1.4.1.2634.3.300.9.0.2			Lost Communication with AUX Unit (Clear)
NTF lostCommSetTrap	1.3.6.1.4.1.2634.3.300.9.0.1			Lost Communication with AUX Unit
lostCommTraps	1.3.6.1.4.1.2634.3.300.9
NTF lostVoltageClearTrap	1.3.6.1.4.1.2634.3.300.10.0.2			Lost Voltage (Line In) (Clear)
NTF lostVoltageSetTrap	1.3.6.1.4.1.2634.3.300.10.0.1			Lost Voltage (Line In)
lostVoltageTraps	1.3.6.1.4.1.2634.3.300.10
NTF overCurrentCriticalClearTrap	1.3.6.1.4.1.2634.3.300.5.0.2			Over Current Critical Alarm (Clear)
NTF overCurrentCriticalSetTrap	1.3.6.1.4.1.2634.3.300.5.0.1			Over Current Critical Alarm
overCurrentCriticalTraps	1.3.6.1.4.1.2634.3.300.5
NTF overCurrentInitialClearTrap	1.3.6.1.4.1.2634.3.300.4.0.2			Over Current Initial Alarm (Clear)
NTF overCurrentInitialSetTrap	1.3.6.1.4.1.2634.3.300.4.0.1			Over Current Initial Alarm
overCurrentInitialTraps	1.3.6.1.4.1.2634.3.300.4
NTF overTemperatureCriticalClearTrap	1.3.6.1.4.1.2634.3.300.7.0.2			Over Temperature Critical Alarm (Clear)
NTF overTemperatureCriticalSetTrap	1.3.6.1.4.1.2634.3.300.7.0.1			Over Temperature Critical Alarm
overTemperatureCriticalTraps	1.3.6.1.4.1.2634.3.300.7
NTF overTemperatureInitialClearTrap	1.3.6.1.4.1.2634.3.300.6.0.2			Over Temperature Initial Alarm (Clear)
NTF overTemperatureInitialSetTrap	1.3.6.1.4.1.2634.3.300.6.0.1			Over Temperature Initial Alarm
overTemperatureInitialTraps	1.3.6.1.4.1.2634.3.300.6
NTF pingNoAnswerClearTrap	1.3.6.1.4.1.2634.3.300.11.0.2			Ping No Answer (Clear)
NTF pingNoAnswerSetTrap	1.3.6.1.4.1.2634.3.300.11.0.1			Ping No Answer
pingNoAnswerTraps	1.3.6.1.4.1.2634.3.300.11
INT plugAction	1.3.6.1.4.1.2634.3.100.200.1.4	INTEGER	read-write	Plug action
plugEntry	1.3.6.1.4.1.2634.3.100.200.1		not-accessible	Row definition for the plug table.
INT plugGroupAction	1.3.6.1.4.1.2634.3.100.300.1.3	INTEGER	read-write	Plug group action
plugGroupEntry	1.3.6.1.4.1.2634.3.100.300.1		not-accessible	Row definition for the plug group table.
INT plugGroupIndex	1.3.6.1.4.1.2634.3.100.300.1.1	INTEGER	not-accessible	Index for the plug group table.
STR plugGroupName	1.3.6.1.4.1.2634.3.100.300.1.2	DisplayString	read-only	The name of the plug group.
plugGroupTable	1.3.6.1.4.1.2634.3.100.300		not-accessible	A table of plug groups.
STR plugID	1.3.6.1.4.1.2634.3.100.200.1.2	DisplayString	read-only	The ID of the plug.
INT plugIndex	1.3.6.1.4.1.2634.3.100.200.1.1	INTEGER	not-accessible	Index for the plug table.
STR plugName	1.3.6.1.4.1.2634.3.100.200.1.5	DisplayString	read-only	The Name of the plug.
INT plugStatus	1.3.6.1.4.1.2634.3.100.200.1.3	INTEGER	read-only	Plug status
plugTable	1.3.6.1.4.1.2634.3.100.200		not-accessible	A table of plugs.
NTF powercycleSetTrap	1.3.6.1.4.1.2634.3.300.13.0.1			Power Cycle
powercycleTraps	1.3.6.1.4.1.2634.3.300.13
systemTables	1.3.6.1.4.1.2634.3.100
NTF testTrap	1.3.6.1.4.1.2634.3.300.2.0.1			A test trap
testTraps	1.3.6.1.4.1.2634.3.300.2
STR trapInfo	1.3.6.1.4.1.2634.3.300.1	DisplayString	read-only	Alarm information
INT userAccessLevel	1.3.6.1.4.1.2634.3.100.400.1.4	INTEGER	read-write	Users access level
STR userAux1Access	1.3.6.1.4.1.2634.3.100.400.1.7	DisplayString	read-write	Access to AUX1 plugs.
STR userAux2Access	1.3.6.1.4.1.2634.3.100.400.1.8	DisplayString	read-write	Access to AUX2 plugs.
STR userAux3Access	1.3.6.1.4.1.2634.3.100.400.1.9	DisplayString	read-write	Access to AUX3 plugs.
STR userCallbackNum	1.3.6.1.4.1.2634.3.100.400.1.16	DisplayString	read-write	Callback number.
INT userCurrentPowerMetering	1.3.6.1.4.1.2634.3.100.400.1.15	INTEGER	read-write	Access to Current/Power Metering.
userEntry	1.3.6.1.4.1.2634.3.100.400.1		not-accessible	Row definition for the user table.
STR userGroupAccess	1.3.6.1.4.1.2634.3.100.400.1.10	DisplayString	read-write	Access to plug groups.
INT userIndex	1.3.6.1.4.1.2634.3.100.400.1.1	INTEGER	not-accessible	Index for the user table.
STR userLocalAccess	1.3.6.1.4.1.2634.3.100.400.1.6	DisplayString	read-write	Access to LOCAL plugs.
STR userName	1.3.6.1.4.1.2634.3.100.400.1.2	DisplayString	read-write	The name of the user.
STR userPasswd	1.3.6.1.4.1.2634.3.100.400.1.3	DisplayString	read-write	The password of the user.
STR userPortAccess	1.3.6.1.4.1.2634.3.100.400.1.5	DisplayString	read-write	Access to ports.
INT userSerialAccess	1.3.6.1.4.1.2634.3.100.400.1.11	INTEGER	read-write	Access to serial interface.
INT userSubmit	1.3.6.1.4.1.2634.3.100.400.1.31	INTEGER	read-write	Submit changes to user.
userTable	1.3.6.1.4.1.2634.3.100.400		not-accessible	A table of users.
INT userTelnetSshAccess	1.3.6.1.4.1.2634.3.100.400.1.12	INTEGER	read-write	Access to Telnet/SSH interface.
INT userWebAccess	1.3.6.1.4.1.2634.3.100.400.1.13	INTEGER	read-write	Access to web interface.
westernTelematic	1.3.6.1.4.1.2634
wti	1.3.6.1.4.1.2634.3			This is the MIB module for the MPC
wtiTraps	1.3.6.1.4.1.2634.3.300

RFC description

Westell Technologies vendor-private MIB for Modular Power Controller device management.

Start monitoring Western Telematic MPC remote power management unit (PDU) (outlet on-off-reboot control/status status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WTI-MPC-MIB

What Is WTI-MPC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description