All MIBs › WTI-RSM-TSM-MIB › alarmOverCurrentInitial
alarmOverCurrentInitial
Module: WTI-RSM-TSM-MIB
OID (symbolic): WTI-RSM-TSM-MIB::alarmOverCurrentInitial
OID (numeric): 1.3.6.1.4.1.2634.1.280.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: State of the Over Current Initial Alarm (0 = Inactive, 1 = Active)
What is alarmOverCurrentInitial?
Whether the unit's first-stage over-current alarm is currently active (1) or inactive (0), an early warning that a plug or circuit is drawing more current than its configured initial threshold before the more serious critical alarm would trip.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2634.1.280.1 snmpwalk -v2c -c public <target> WTI-RSM-TSM-MIB::alarmOverCurrentInitial
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2634.1.280.1.1 snmpget -v2c -c public <target> WTI-RSM-TSM-MIB::alarmOverCurrentInitial.1
Start monitoring Western Telematic Inc. (WTI) RSM/TSM remote serial console server (serial-port config/session-access status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WTI-RSM-TSM-MIB::alarmOverCurrentInitial OID value, configure state conditions and alerts, and monitor any Western Telematic Inc. (WTI) RSM/TSM remote serial console server (serial-port config/session-access status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2634 | westernTelematic | WTI-MPC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2634.1 | rsm_tsm | WTI-RSM-TSM-MIB |
| 1.3.6.1.4.1.2634.1.280 | alarmTables | WTI-RSM-TSM-MIB |
| 1.3.6.1.4.1.2634.1.280.1 | alarmOverCurrentInitial | WTI-RSM-TSM-MIB |