All MIBs › WTI-MPC-MIB › plugAction
plugAction
Module: WTI-MPC-MIB
OID (symbolic): WTI-MPC-MIB::plugAction
OID (numeric): 1.3.6.1.4.1.2634.3.100.200.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Plug action
What is plugAction?
Writing a value here issues a power command to this specific outlet; the WTI MPC firmware maps the 0-8 range to actions like on, off, and reboot/cycle, letting an admin remotely power-cycle a hung device plugged into this plug.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2634.3.100.200.1.4 snmpwalk -v2c -c public <target> WTI-MPC-MIB::plugAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2634.3.100.200.1.4.1 snmpget -v2c -c public <target> WTI-MPC-MIB::plugAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2634.3.100.200.1.4.1 i <value>
Start monitoring Western Telematic MPC remote power management unit (PDU) (outlet on-off-reboot control/status status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WTI-MPC-MIB::plugAction OID value, configure state conditions and alerts, and monitor any Western Telematic MPC remote power management unit (PDU) (outlet on-off-reboot control/status status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2634 | westernTelematic | WTI-MPC-MIB |
| 1.3.6.1.4.1.2634.3 | wti | WTI-MPC-MIB |
| 1.3.6.1.4.1.2634.3.100 | systemTables | WTI-MPC-MIB |
| 1.3.6.1.4.1.2634.3.100.200 | plugTable | WTI-MPC-MIB |
| 1.3.6.1.4.1.2634.3.100.200.1 | plugEntry | WTI-MPC-MIB |
| 1.3.6.1.4.1.2634.3.100.200.1.4 | plugAction | WTI-MPC-MIB |