All MIBs › WRI-CPU-MIB
Organization: Wuhan FiberHome Networks Co.,Ltd.
Last Updated: 2010-01-11
Category: FiberHome Networks
Description:
Monitors FiberHome Networks device CPU utilization and processor load statistics for performance management.
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION |
From WRI-SMI
| wri | MODULE-IDENTITY |
| wriProducts | OBJECT-IDENTITY |
What Is WRI-CPU-MIB?
WRI-CPU-MIB is a FiberHome Networks module dedicated to monitoring CPU utilization on the vendor's network devices, providing processor load statistics used for performance management. It exposes CPU load/utilization data, likely broken down over time intervals or per processing unit depending on the device model. This is a direct hardware/software health MIB: CPU utilization is one of the most fundamental indicators of whether a network device is under load or approaching a performance ceiling. No specific dependency on other MIBs is apparent from the minimal module description. It is deployed on FiberHome transport/access network equipment where operators need baseline processor-load visibility for capacity and health monitoring. Engineers can download the WRI-CPU-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WRI-CPU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- CPU utilization
- processor load statistics
Supported Devices
- FiberHome Networks transport/access device
Monitoring Examples
No sample object or table names were extracted for this module, so specific identifiers cannot be cited; an administrator would poll the device's CPU utilization objects on a regular interval to detect sustained high CPU load that could indicate a software fault, routing instability, or capacity limit being reached. Without a verified object list, further technical detail would not be grounded in the actual MIB content.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mspp | 1.3.6.1.4.1.3807.1.8012 | |||
| msppChassis | 1.3.6.1.4.1.3807.1.8012.1 | |||
| msppCpu | 1.3.6.1.4.1.3807.1.8012.1.4 | The MIB module to describe the monitor for cpu. | ||
| cpuTable | 1.3.6.1.4.1.3807.1.8012.1.4.1 | not-accessible | Cpu information table. | |
| cpuEntry | 1.3.6.1.4.1.3807.1.8012.1.4.1.1 | not-accessible | An entry in the cpu table. | |
| U32 cpuIndex | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.1 | Unsigned32 | read-only | Cpu index. |
| C32 cpuUsage | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.2 | Counter32 | read-only | The current usage of cpu |
| C32 cpuMaxUsage | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.3 | Counter32 | read-only | Max usage of cpu. |
| C32 cpuHthreshold | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.4 | Counter32 | read-write | High threshold of cpu. |
| C32 cpuLthreshold | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.5 | Counter32 | read-write | low threshold of cpu. |
| INT cpuOneTrap | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.6 | INTEGER | read-write | Trap enable or not of the cpu |
| INT cpuStatus | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.7 | INTEGER | read-only | Cpu status |
| OCT cpuDescr | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.8 | OCTET STRING | read-only | Cpu description. |
| OCT cpuAllSetting | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.9 | OCTET STRING | read-write | All parameter operation for the cpu. |
| C32 cpuLastOneMinuteUsage | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.10 | Counter32 | read-only | The last-1-minute usage of cpu |
| C32 cpuLastFiveMinuteUsage | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.11 | Counter32 | read-only | The last-5-minute usage of cpu |
| OCT cpuIndexDescr | 1.3.6.1.4.1.3807.1.8012.1.4.1.1.12 | OCTET STRING | read-only | Cpu index description. |
| cpuTrap | 1.3.6.1.4.1.3807.1.8012.1.4.2 | |||
| NTF cpuOverThreshold | 1.3.6.1.4.1.3807.1.8012.1.4.2.1 | mspp cpu over threshold trap. | ||
| NTF cpuUnderThreshold | 1.3.6.1.4.1.3807.1.8012.1.4.2.2 | mspp cpu under threshold trap. | ||
| NTF cpuRecoverThreshold | 1.3.6.1.4.1.3807.1.8012.1.4.2.3 | mspp cpu recover threshold trap. | ||
| cpuGeneral | 1.3.6.1.4.1.3807.1.8012.1.4.3 | |||
| INT cpuNum | 1.3.6.1.4.1.3807.1.8012.1.4.3.1 | INTEGER | read-only | Cpu numbers |
| INT cpuTrapEnable | 1.3.6.1.4.1.3807.1.8012.1.4.3.2 | INTEGER | read-write | Enable cpu trap or not. |
| INT cpuMonitor | 1.3.6.1.4.1.3807.1.8012.1.4.3.3 | INTEGER | read-write | Enable cpu monitor or not. |
RFC description
Monitors CPU usage and performance metrics on FiberHome (WRI) MSPP routing platforms.
Start monitoring FiberHome Networks transport/access device (CPU utilization status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.