All MIBs › WL400-DOT11EXT-MIB › roamJoinTimeout
roamJoinTimeout
Module: WL400-DOT11EXT-MIB
OID (symbolic): WL400-DOT11EXT-MIB::roamJoinTimeout
OID (numeric): 1.3.6.1.4.1.232.145.1.5.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The firmware will keep trying to find a suitable BSS until another MLME-JOIN.request is issued. The object roamJoinTimeout allows the application to estimate how long it at least has to wait before it can assume that MLME-JOIN.request is likely to fail. The object should be considered for information purposes. Changing the object will have no effect.
Future versions may use this object to limit the time it spends to try to join a specific Service Set.
What is roamJoinTimeout?
This is an informational estimate of how long the firmware will keep retrying to find a suitable BSS to join before an MLME-JOIN.request is likely considered failed; changing this object has no effect. Admins use this only as a diagnostic reference for how long a join attempt is expected to take, since it's not itself a configurable control.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.145.1.5.1.6 snmpwalk -v2c -c public <target> WL400-DOT11EXT-MIB::roamJoinTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.145.1.5.1.6.1 snmpget -v2c -c public <target> WL400-DOT11EXT-MIB::roamJoinTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.232.145.1.5.1.6.1 i <value>
Start monitoring Compaq WL400 802.11 wireless network adapter (association/BSSID-SSID/signal-quality status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WL400-DOT11EXT-MIB::roamJoinTimeout OID value, configure state conditions and alerts, and monitor any Compaq WL400 802.11 wireless network adapter (association/BSSID-SSID/signal-quality status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| 1.3.6.1.4.1.232.145 | wl400Products | WL400-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.145.1 | dot11ExtMIB | WL400-DOT11EXT-MIB |
| 1.3.6.1.4.1.232.145.1.5 | dot11ExtWBUObjs | WL400-DOT11EXT-MIB |
| 1.3.6.1.4.1.232.145.1.5.1 | roam | WL400-DOT11EXT-MIB |
| 1.3.6.1.4.1.232.145.1.5.1.6 | roamJoinTimeout | WL400-DOT11EXT-MIB |