WESTERN-MULTIPLEX-RAD10006-MIB :: statRadioLogHealth

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsWESTERN-MULTIPLEX-RAD10006-MIBstatRadioLogHealth

statRadioLogHealth

Module: WESTERN-MULTIPLEX-RAD10006-MIB

OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::statRadioLogHealth

OID (numeric): 1.3.6.1.4.1.3727.20.20.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This non-persistent variable indicates the current health status of the radio, determined by the Network Management Unit, or NMU's system event log. This MIB variable can be polled to provide a high-level status of the managed radio.

This variable is identical to 'logRadioHEALTH' defined in the 'WESTERN-MULTIPLEX-MIB'.

This variable indicates the highest severity level of any NMU system log record that has a 'health' and 'radio' qualifiers. Records that do not have a 'health' and a 'Radio' qualifier do not effect this variable. Records that have been 'NORMALIZED' (see the definition in 'logRecDescription' in 'WESTERN-MULTIPLEX-MIB') do not effect this variable.

'critical-health' is the highest severity level, followed in decreasing order by 'major-health', 'minor-health', 'warning-health', and 'normal-health', which is the lowest 'health' severity level.

If this variable has a value of 'normal-health', then either there are no records that effect health and are qualified by 'Radio' in the system log, or the only health effecting records qualified by 'radio' have a severity level of 'normal-health'.

There is no default value for this variable.

What is statRadioLogHealth?

This reports the highest-severity 'health'-qualified, 'radio'-qualified event currently in the NMU's system event log: normal-health(1, lowest), warning-health(2), minor-health(3), major-health(4), or critical-health(5, highest); it mirrors logRadioHEALTH from WESTERN-MULTIPLEX-MIB and ignores normalized log records. Admins poll this single object as a quick top-level health check on the radio before drilling into the individual alarm objects like statT1Input or statFan1.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.2.1
snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::statRadioLogHealth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.2.1.1
snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::statRadioLogHealth.1

Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::statRadioLogHealth OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3727western_multiplexWESTERN-MULTIPLEX-MIB
1.3.6.1.4.1.3727.20tsunami100_06WESTERN-MULTIPLEX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3727.20.20radioWESTERN-MULTIPLEX-RAD10006-MIB
1.3.6.1.4.1.3727.20.20.2statusWESTERN-MULTIPLEX-RAD10006-MIB
1.3.6.1.4.1.3727.20.20.2.1statRadioLogHealthWESTERN-MULTIPLEX-RAD10006-MIB