All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › mgmtT1CodeViolationSeverity
mgmtT1CodeViolationSeverity
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::mgmtT1CodeViolationSeverity
OID (numeric): 1.3.6.1.4.1.3727.20.20.3.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular event.
In this case, the event indicates the detection of a transition of the T1 Code Violation condition.
This severity level variable is associated with the 't1CvTrap' trap, and a log event message that indicates a change in the Radio's T1 Code Violation condition.
'critical' is the highest severity level, followed in decreasing order by 'major', 'minor', 'warning', and 'normal', which is the lowest severity level.
The default severity level is 'normal'.
This trap may also be filtered by 'mgmtT1CodeViolationTrapControl'.
What is mgmtT1CodeViolationSeverity?
This sets the severity level (normal(1, the default) through critical(5)) recorded for a T1 line-code-violation condition change, associated with the 't1CvTrap' trap. Admins tune this to control how prominently a T1 code-violation alarm is escalated, subject to further filtering by mgmtT1CodeViolationTrapControl.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.6 snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtT1CodeViolationSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.6.1 snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtT1CodeViolationSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3727.20.20.3.6.1 i <value>
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::mgmtT1CodeViolationSeverity OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3 | mgmt | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3.6 | mgmtT1CodeViolationSeverity | WESTERN-MULTIPLEX-RAD10006-MIB |