All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › mgmtRxSynthSeverity
mgmtRxSynthSeverity
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::mgmtRxSynthSeverity
OID (numeric): 1.3.6.1.4.1.3727.20.20.3.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular event.
In this case, the event indicates the detection of a transition of the receiver-sythesizer alarm conditionb on the Radio.
This severity level variable is associated with the 'rxSynthTrap' trap, and a log event message that indicates a change in this condition within the Radio.
'critical' is the highest severity level, followed in decreasing order by 'major', 'minor', 'warning', and 'normal', which is the lowest severity level.
The default severity level is 'normal'.
This trap may also be filtered by 'mgmtRxSynthTrapControl'.
What is mgmtRxSynthSeverity?
This sets the severity level (normal(1, the default) through critical(5)) recorded for a receiver-synthesizer alarm condition change, associated with the 'rxSynthTrap' trap. Admins raise this since an Rx synthesizer fault can take the radio's receive path offline, subject to further filtering by mgmtRxSynthTrapControl.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.20 snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtRxSynthSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.20.1 snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtRxSynthSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3727.20.20.3.20.1 i <value>
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::mgmtRxSynthSeverity OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3 | mgmt | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3.20 | mgmtRxSynthSeverity | WESTERN-MULTIPLEX-RAD10006-MIB |