All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › mgmtFan1Severity
mgmtFan1Severity
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::mgmtFan1Severity
OID (numeric): 1.3.6.1.4.1.3727.20.20.3.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular event.
In this case, the event indicates the detection of a transition of the FAN alarm on the FAN1 Unit.
This severity level variable is associated with the 'fan1Trap' trap, and a log event message that indicates a change in the FAN1 alarm.
'critical' is the highest severity level, followed in decreasing order by 'major', 'minor', 'warning', and 'normal', which is the lowest severity level.
The default severity level is 'normal'.
This trap may also be filtered by 'mgmtFan1TrapControl'.
What is mgmtFan1Severity?
This sets the severity level (normal(1, the default) through critical(5)) recorded for a fan 1 alarm condition change, associated with the 'fan1Trap' trap. Since a failed cooling fan risks overheating, admins often raise this above normal, subject to further filtering by mgmtFan1TrapControl.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.16 snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtFan1Severity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.16.1 snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtFan1Severity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3727.20.20.3.16.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mgmtFan1Severity.1
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::mgmtFan1Severity OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3 | mgmt | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3.16 | mgmtFan1Severity | WESTERN-MULTIPLEX-RAD10006-MIB |