All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › mgmtBitErrorSeverity
mgmtBitErrorSeverity
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::mgmtBitErrorSeverity
OID (numeric): 1.3.6.1.4.1.3727.20.20.3.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This persistent variable indicates the desired severity level to be associated with the log event and the SNMP trap that record the occurance of a particular event.
In this case, the event indicates the detection of a transition of the Bit Error Rate 6 (or BER6) Alarm on the Radio. The 6 refers to a bit error rate of 10 to the minus 6 (1.0 E -6).
This severity level variable is associated with the 'berTrap' trap, and a log event message that indicates a change in the BER 6 Alarm within the Radio.
'critical' is the highest severity level, followed in decreasing order by 'major', 'minor', 'warning', and 'normal', which is the lowest severity level.
The default severity level is 'normal'.
This trap may also be filtered by 'mgmtBitErrorTrapControl'.
What is mgmtBitErrorSeverity?
This sets the severity level (normal(1, the default) through critical(5)) recorded for a bit-error-rate threshold condition change, associated with the 'berTrap' trap. Admins tune this to control how the BER alarm (tied to statBitError) is escalated in logs and traps, subject to further filtering by mgmtBitErrorTrapControl.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.14 snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtBitErrorSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.3.14.1 snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::mgmtBitErrorSeverity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3727.20.20.3.14.1 i <value>
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::mgmtBitErrorSeverity OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3 | mgmt | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.3.14 | mgmtBitErrorSeverity | WESTERN-MULTIPLEX-RAD10006-MIB |