All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › cnfgT1LineBuildOut
cnfgT1LineBuildOut
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1LineBuildOut
OID (numeric): 1.3.6.1.4.1.3727.20.20.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This persistent variable contains the current T1 Line Build Out configuration for the radio. For DSX-1 applications, line lengths from 0 to 655 feet (as measured from the DS-1 connector to the DSX-1 cross connect) are selectable. The five partition arrangement meets ANSI T1.102-1993 requirements when using ABAM cable.
The default value for this variable is 'lb-0-133-ft'.
What is cnfgT1LineBuildOut?
This sets the T1 Line Build Out cable-length compensation for a DSX-1 connection, selectable in five ranges from lb-0-133-ft(1, the default) up to lb-533-655-ft(5), spanning 0-655 feet as measured from the DS-1 connector to the DSX-1 cross-connect (per ANSI T1.102-1993 using ABAM cable). Admins set this to match the actual physical cable run length between the radio and the DSX-1 cross-connect to maintain correct T1 signal levels.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.1.2 snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1LineBuildOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.1.2.1 snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1LineBuildOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3727.20.20.1.2.1 i <value>
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1LineBuildOut OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.1 | config | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.1.2 | cnfgT1LineBuildOut | WESTERN-MULTIPLEX-RAD10006-MIB |