All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › cnfgT1FarEndRadioLoopback
cnfgT1FarEndRadioLoopback
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1FarEndRadioLoopback
OID (numeric): 1.3.6.1.4.1.3727.20.20.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This non-persistent variable contains the current state of the loopback mode for the radio side of the T1 channel of the remote radio.
'enabled' reconfigures the T1 data path of the radio. The data path is set to take data received from the radio side of the system and send it back out the transmitter of the radio.
'disabled' turns off the T1 channel radio loopback mode, and allows T1 data received from the radio side of the system to be presented to its Line Interface Unit, and T1 data received from the Line Interface Unit to be transmitted by the radio.
The default value for this variable is disabled(2).
What is cnfgT1FarEndRadioLoopback?
This controls a non-persistent T1 radio-side loopback on the remote radio: enabled(2) reroutes data received from the radio side back out that remote radio's transmitter, while disabled(1, the default) restores normal pass-through. Admins use this to test the far-end radio's T1 path remotely from the near-end management station, remembering it disrupts normal traffic at the far end while active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.1.4 snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1FarEndRadioLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.1.4.1 snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1FarEndRadioLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3727.20.20.1.4.1 i <value>
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::cnfgT1FarEndRadioLoopback OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.1 | config | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.1.4 | cnfgT1FarEndRadioLoopback | WESTERN-MULTIPLEX-RAD10006-MIB |