All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › cnfgAIS
cnfgAIS
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::cnfgAIS
OID (numeric): 1.3.6.1.4.1.3727.20.20.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This non-persistent variable contains the configuration setting of the AIS output. It allows the SNMP user to control AIS output.
'enabled' enables the AIS output.
'disabled' disables the AIS output.
The default value for this variable is 'disabled'.
What is cnfgAIS?
This controls whether the radio's AIS (Alarm Indication Signal) output is enabled(2) or disabled(1, the default). Admins enable this so that, on a T1 fault, the radio marks its transmit output with an all-ones AIS pattern to alert downstream equipment of the failure rather than passing corrupted or absent data silently.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.1.6 snmpwalk -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::cnfgAIS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3727.20.20.1.6.1 snmpget -v2c -c public <target> WESTERN-MULTIPLEX-RAD10006-MIB::cnfgAIS.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3727.20.20.1.6.1 i <value>
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::cnfgAIS OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.1 | config | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.1.6 | cnfgAIS | WESTERN-MULTIPLEX-RAD10006-MIB |