All MIBs › WESTERN-MULTIPLEX-RAD10006-MIB › berTrap
berTrap
Module: WESTERN-MULTIPLEX-RAD10006-MIB
OID (symbolic): WESTERN-MULTIPLEX-RAD10006-MIB::berTrap
OID (numeric): 1.3.6.1.4.1.3727.20.20.2.0.7
Node type: NOTIFICATION-TYPE
Description: This trap is generated by the SNMP Agent when the Agent has detected a transition in the Radio's, Bit Error Rate 6 (or BER6) Alarm. The 6 refers to a bit error rate of 10 to the minus 6 (1.0 E -6). This trap may be filtered by 'mgmtBitErrorTrapControl', which is a specific Trap control that can be used to specifically enable or disable this trap. See the definition of this variable above for details about this filter, and the other trap filtering mechanisms. The 'trapSequenceNumber,' variable bound within the trap can be used by management stations and network administrators to detect when a trap has been lost during transmission. The 'mgmtBitErrorSeverity' variable bound within the trap indicates the configured severity level associated with this event. A value of 'NORMAL', indicates that BER is less than 10 to the minus 6. A value of 'BER-6', indicates that the radio signal has a bit error rate, or BER, greater than 10 to minu 6, (1.0 E -6). The row/column variables included in the trap are: system.trap.trapSequenceNumber; radio.mgmt.mgmtBitErrorSeverity.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' WESTERN-MULTIPLEX-RAD10006-MIB::berTrap snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.3727.20.20.2.0.7
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:64508->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (423898620) 49 days, 1:29:46.20 SNMPv2-MIB::snmpTrapOID.0 = OID: WESTERN-MULTIPLEX-RAD10006-MIB::berTrap
SNMPv3 example:
snmptrap -v3 -l authPriv -u snmpv3user -a SHA -A "AuthPass1" -x AES -X "PrivPass1" <manager> '' WESTERN-MULTIPLEX-RAD10006-MIB::berTrap
Start monitoring Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WESTERN-MULTIPLEX-RAD10006-MIB::berTrap OID value, configure state conditions and alerts, and monitor any Western Multiplex Tsunami/RAD-10006 microwave radio links (T1-line/loopback/Ethernet-interface status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3727 | western_multiplex | WESTERN-MULTIPLEX-MIB |
| 1.3.6.1.4.1.3727.20 | tsunami100_06 | WESTERN-MULTIPLEX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3727.20.20 | radio | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.2 | status | WESTERN-MULTIPLEX-RAD10006-MIB |
| 1.3.6.1.4.1.3727.20.20.2.0.7 | berTrap | WESTERN-MULTIPLEX-RAD10006-MIB |