All MIBs › WAYSTREAM-COPY-MIB
Organization: Waystream AB
Last Updated: 2017-02-10
Category: Waystream Networking
Description:
Manages Waystream AB traffic copy and mirroring configurations for network monitoring and analysis purposes.
Imported Objects
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString |
From WAYSTREAM-SMI
| wsExperiment | OBJECT-IDENTITY |
What Is WAYSTREAM-COPY-MIB?
WAYSTREAM-COPY-MIB is a Waystream AB module describing the file copy/mirroring functions available on Waystream ASR (Access Service Router) devices, used to copy configuration or software files between locations (e.g., for backup, firmware staging, or traffic mirroring for analysis). It exposes a table of copy jobs including their source, destination, and current state. Its monitoring role is centered on software/operational status: tracking whether a file copy job (such as a firmware or configuration transfer) is running, has completed, or has failed, which is directly relevant to confirming successful software/configuration deployment on the router. No specific dependency on other MIBs is apparent from the module description. It is deployed on Waystream ASR routers in carrier or enterprise access networks where remote firmware/config management is performed via SNMP. Engineers can download the WAYSTREAM-COPY-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WAYSTREAM-COPY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- copy job source/destination
- copy operation status
- copy job state transitions
- copy error status
Supported Devices
- Waystream ASR (Access Service Router)
Monitoring Examples
An administrator would poll wsCopyTable/wsCopyEntry rows indexed by wsCopyIndex to see wsCopySource and wsCopyDestination for an in-progress transfer, checking wsCopyStatus and wsCopyNextState to confirm the copy operation's current phase. A non-zero or error value in wsCopyError alongside a stalled wsCopyStatus would indicate a failed firmware or configuration copy that needs to be retried.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wsCopy | 1.3.6.1.4.1.9303.3.2 | MIB describing the file copy functions available on Waystream ASRs | ||
| U32 wsCopyNextState | 1.3.6.1.4.1.9303.3.2.1 | Unsigned32 | read-only | Generate a unique filehandle. The filehandle is used with the other objects in the wsCopy branch to set the source and destination and commence file transfer activities. |
| wsCopyTable | 1.3.6.1.4.1.9303.3.2.2 | not-accessible | A list of current copy sessions. The next available entry is given by the value of wsCopyNextState. | |
| wsCopyEntry | 1.3.6.1.4.1.9303.3.2.2.1 | not-accessible | An entry for a copy session. | |
| U32 wsCopyIndex | 1.3.6.1.4.1.9303.3.2.2.1.1 | Unsigned32 | read-only | A unique value for each copy session. |
| STR wsCopySource | 1.3.6.1.4.1.9303.3.2.2.1.2 | DisplayString | read-write | The source URL for a filhandle. The string provided must match an acceptable URL as typed in the command line interface copy command. |
| STR wsCopyDestination | 1.3.6.1.4.1.9303.3.2.2.1.3 | DisplayString | read-write | The destination filename for a filehandle. The string provided must match an acceptable destination as typed in the command line interface copy command. |
| INT wsCopyStatus | 1.3.6.1.4.1.9303.3.2.2.1.4 | INTEGER | read-write | The status of a filehandle notused - Get: The filehandle has not been used during the last 24 hours Set: Not possible start - Get: Not possible Set: Start filetransfer stop - Get: Not possible Set: Stop filetransfer in progress destroy - Get: Not possible Set: Remove source and destination entries for filehandle init - Get: Filtransfer started Set: Not possible inprogress - Get: Filetransfer in progress Set: Not possible failed - Get: A failure occured during last filetransfer Set: Not possible finished - Get: The file was successfully transferred and stored Set: not possible |
| STR wsCopyError | 1.3.6.1.4.1.9303.3.2.2.1.5 | DisplayString | read-only | A textual description of the filehandle last error status. If the filehandle does not exist or has not been used for the last 24 hours, a 'No Error' message is returned. |
RFC description
Waystream Copy MIB provides management objects for copying and backing up configuration data on Waystream broadband access devices.
Start monitoring Waystream ASR (Access Service Router) (file copy-job source/destination/state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.