All MIBs › VPWR-DC-POWER-MIB › vpwrLvdWarningSetpoint
vpwrLvdWarningSetpoint
Module: VPWR-DC-POWER-MIB
OID (symbolic): VPWR-DC-POWER-MIB::vpwrLvdWarningSetpoint
OID (numeric): 1.3.6.1.4.1.13858.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: LVD Warning voltage setpoint.
What is vpwrLvdWarningSetpoint?
Sets the low-voltage-disconnect (LVD) warning threshold, in hundredths of a volt, at which the system warns that the battery voltage is approaching the point where non-critical loads will be disconnected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13858.4.1.1 snmpwalk -v2c -c public <target> VPWR-DC-POWER-MIB::vpwrLvdWarningSetpoint
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13858.4.1.1.1 snmpget -v2c -c public <target> VPWR-DC-POWER-MIB::vpwrLvdWarningSetpoint.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.13858.4.1.1.1 i <value>
Start monitoring Valere Power DC power plant / rectifier system (voltage/current/rectifier alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VPWR-DC-POWER-MIB::vpwrLvdWarningSetpoint OID value, configure state conditions and alerts, and monitor any Valere Power DC power plant / rectifier system (voltage/current/rectifier alarm status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13858 | vpwrDcPowerMgt | VALERE-DC-POWER-MIB |
| 1.3.6.1.4.1.13858.4 | vpwrDcPowerLvd | VALERE-DC-POWER-MIB |
| 1.3.6.1.4.1.13858.4.1 | vpwrLvdConfigGroup | VALERE-DC-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13858.4.1.1 | vpwrLvdWarningSetpoint | VPWR-DC-POWER-MIB |