VPLS-LDP-DRAFT-01-MIB :: jnxVplsLdpPwBindMacAddressLimit

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › VPLS-LDP-DRAFT-01-MIB › jnxVplsLdpPwBindMacAddressLimit

jnxVplsLdpPwBindMacAddressLimit

Module: VPLS-LDP-DRAFT-01-MIB

OID (symbolic): VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpPwBindMacAddressLimit

OID (numeric): 1.3.6.1.4.1.2636.5.9.1.2.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The value of this object specifies the maximum number of learned and static entries allowed in the Forwarding database for this PW Binding. The value 0 means there is no limit for this PW Binding.

What is jnxVplsLdpPwBindMacAddressLimit?

This object sets the maximum number of learned and static MAC address entries allowed in the forwarding database for a specific VPLS pseudowire binding, where a value of zero means no limit is enforced. An administrator sets a non-zero limit to protect the forwarding table from being exhausted by a MAC flooding attack or misbehaving device on that pseudowire. For example, setting jnxVplsLdpPwBindMacAddressLimit to 500 on a customer-facing pseudowire caps how many distinct MAC addresses that binding can learn, preventing one runaway customer site from consuming shared forwarding table resources.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.9.1.2.1.1
snmpwalk -v2c -c public <target> VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpPwBindMacAddressLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.9.1.2.1.1.1
snmpget -v2c -c public <target> VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpPwBindMacAddressLimit.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxVplsLdpPwBindMacAddressLimit.1

Start monitoring vendor-neutral, standards-based MIB, MPLS provider-edge (PE) router supporting VPLS/LDP pseudowires (LDP-signaled pseudowire status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpPwBindMacAddressLimit OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, MPLS provider-edge (PE) router supporting VPLS/LDP pseudowires (LDP-signaled pseudowire status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.5jnxExperimentJUNIPER-EXPERIMENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2636.5.9jnxVplsLdpDraft01MIBVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1jnxVplsLdpObjectsVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1.2jnxVplsLdpPwBindTableVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1.2.1jnxVplsLdpPwBindEntryVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1.2.1.1jnxVplsLdpPwBindMacAddressLimitVPLS-LDP-DRAFT-01-MIB