VPLS-LDP-DRAFT-01-MIB :: jnxVplsLdpConfigMacAddrWithdraw

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › VPLS-LDP-DRAFT-01-MIB › jnxVplsLdpConfigMacAddrWithdraw

jnxVplsLdpConfigMacAddrWithdraw

Module: VPLS-LDP-DRAFT-01-MIB

OID (symbolic): VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpConfigMacAddrWithdraw

OID (numeric): 1.3.6.1.4.1.2636.5.9.1.1.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: This object specifies if MAC address withdrawal is enabled in this service. If this object is true then Mac address withdrawl Learning is enabled. If false, then Mac Learning is disabled.

What is jnxVplsLdpConfigMacAddrWithdraw?

This object reports whether MAC address withdrawal is enabled for a VPLS service using LDP signaling, where enabling it (the default) lets the device signal peers to flush learned MAC addresses when a link fails, speeding up convergence, versus leaving MAC learning simply disabled if false. An administrator checks this to confirm fast-convergence behavior is active for a given VPLS instance after a topology change. For example, jnxVplsLdpConfigMacAddrWithdraw reading true for a VPLS service confirms that when a PE-CE link flaps, peer routers will be told to flush stale MAC entries rather than waiting for them to age out naturally.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.9.1.1.1.1
snmpwalk -v2c -c public <target> VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpConfigMacAddrWithdraw

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.9.1.1.1.1.1
snmpget -v2c -c public <target> VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpConfigMacAddrWithdraw.1

Start monitoring vendor-neutral, standards-based MIB, MPLS provider-edge (PE) router supporting VPLS/LDP pseudowires (LDP-signaled pseudowire status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VPLS-LDP-DRAFT-01-MIB::jnxVplsLdpConfigMacAddrWithdraw OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, MPLS provider-edge (PE) router supporting VPLS/LDP pseudowires (LDP-signaled pseudowire status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.5jnxExperimentJUNIPER-EXPERIMENT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2636.5.9jnxVplsLdpDraft01MIBVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1jnxVplsLdpObjectsVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1.1jnxVplsLdpConfigTableVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1.1.1jnxVplsLdpConfigEntryVPLS-LDP-DRAFT-01-MIB
1.3.6.1.4.1.2636.5.9.1.1.1.1jnxVplsLdpConfigMacAddrWithdrawVPLS-LDP-DRAFT-01-MIB