All MIBs › VPLS-BGP-DRAFT-01-MIB › jnxVplsBgpConfigVERangeSize
jnxVplsBgpConfigVERangeSize
Module: VPLS-BGP-DRAFT-01-MIB
OID (symbolic): VPLS-BGP-DRAFT-01-MIB::jnxVplsBgpConfigVERangeSize
OID (numeric): 1.3.6.1.4.1.2636.5.10.1.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Specifies the size of the range of VE ids in this VPLS service. This number controls the size of the label block advertised for this VE by the PE. A value of 0 indicates that the range is not configured and the PE derives the range value from received advertisements from other PEs.
What is jnxVplsBgpConfigVERangeSize?
This read-only Unsigned32 (0-65535, default 0) specifies the size of the VE ID range for a VPLS service, which controls the size of the label block the PE advertises for this VE; a value of 0 means the range is not configured and is instead derived from advertisements received from other PEs. Admins configure this on a VPLS PE to size how many VE IDs, and thus how many potential remote sites, this service can address. For example, setting this to 16 reserves a label block covering 16 VE IDs for this VPLS instance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.5.10.1.1.1.1 snmpwalk -v2c -c public <target> VPLS-BGP-DRAFT-01-MIB::jnxVplsBgpConfigVERangeSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.5.10.1.1.1.1.1 snmpget -v2c -c public <target> VPLS-BGP-DRAFT-01-MIB::jnxVplsBgpConfigVERangeSize.1
Start monitoring Provider Edge (PE) router, vendor-neutral, standards-based MIB (BGP-signaled VPLS instance/pseudowire status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VPLS-BGP-DRAFT-01-MIB::jnxVplsBgpConfigVERangeSize OID value, configure state conditions and alerts, and monitor any Provider Edge (PE) router, vendor-neutral, standards-based MIB (BGP-signaled VPLS instance/pseudowire status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.5 | jnxExperiment | JUNIPER-EXPERIMENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.5.10 | jnxVplsBgpDraft01MIB | VPLS-BGP-DRAFT-01-MIB |
| 1.3.6.1.4.1.2636.5.10.1 | jnxVplsBgpObjects | VPLS-BGP-DRAFT-01-MIB |
| 1.3.6.1.4.1.2636.5.10.1.1 | jnxVplsBgpConfigTable | VPLS-BGP-DRAFT-01-MIB |
| 1.3.6.1.4.1.2636.5.10.1.1.1 | jnxVplsBgpConfigEntry | VPLS-BGP-DRAFT-01-MIB |
| 1.3.6.1.4.1.2636.5.10.1.1.1.1 | jnxVplsBgpConfigVERangeSize | VPLS-BGP-DRAFT-01-MIB |