VOICE-VLAN-MIB

Description: Manages voice VLAN port assignment and QoS prioritization for IP phones on D-Link switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

VOICE-VLAN-MIB is a D-Link proprietary enterprise MIB for managing the Voice VLAN feature on D-Link switches, which automatically assigns IP phone traffic to a dedicated VLAN and applies QoS prioritization; the source excerpt had no MODULE-IDENTITY description text, so this reading relies on the short description. It exposes configuration data for voice VLAN port assignment and priority/QoS settings for voice traffic. This is primarily a traffic-classification configuration MIB rather than a hardware-health one - an admin verifies that phone-facing ports are correctly enrolled in the voice VLAN and prioritized, and a misconfiguration here shows up as poor call quality rather than a hardware fault. No concrete object names were available in the source, though such MIBs typically work alongside standard VLAN (Q-BRIDGE-MIB) and QoS conventions. It's deployed on D-Link switches in enterprise or SMB environments supporting VoIP phones. Engineers can download the VOICE-VLAN-MIB file directly to load it into their MIB browser.

No sample object names were present in the source excerpt for this module, so specific OIDs cannot be cited; based on the description, an admin would typically check per-port voice VLAN assignment and QoS priority to confirm an IP phone port is correctly classified, since an unassigned port would carry voice traffic without QoS prioritization and suffer call quality issues.

Configures and manages Voice VLAN on D-Link switches for automatic voice traffic classification and prioritization.