All MIBs › VOICE-OPT-MIB › cdx6500VoiceCfgTxInputSignalLevel
cdx6500VoiceCfgTxInputSignalLevel
Module: VOICE-OPT-MIB
OID (symbolic): VOICE-OPT-MIB::cdx6500VoiceCfgTxInputSignalLevel
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.18
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Enter the input signal level. To be specified in steps of 0.5 dBm FXO Interface Type : 600 Ohms +6.0 to -2.5dbm 600 Ohms Adaptive +6.0 to -2.5dbm FXS Interface Type : 600 Ohms +6.0 to -6.0dbm Canada +6.0 to -5.5dbm UK +4.5 to -7.5dbm Germany +4.0 to -8.0dbm France -2.0 to -9.0dbm Belgium +4.0 to -8.0dbm E&M Interface Type : 4-Wire/600 +7.0 to -16.0dbm 2-Wire/600 +7.0 to -16.0dbm 2-Wire/UK +5.0 to -16.0dbm 2-Wire/Germany +5.0 to -16.0dbm Virtual Ports(100 and above): +8.0 to -6.0dbm Entering a negative number for the 'Input Signal Level' will result in the DSPM card amplifying the signal by that many dB. Entering a positive number for the 'Input Signal Level' will result in the DSPM card attenuating the signal by that many dB.
What is cdx6500VoiceCfgTxInputSignalLevel?
The configured transmit input signal level in 0.5 dBm steps, whose valid range depends on interface type (e.g. FXO 600-ohm allows +6.0 to -2.5 dBm, 4-wire E&M allows +7.0 to -16.0 dBm). A negative entry tells the DSPM card to amplify the incoming signal by that many dB, a positive entry to attenuate it, letting an admin level-match mismatched PBX equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.18 snmpwalk -v2c -c public <target> VOICE-OPT-MIB::cdx6500VoiceCfgTxInputSignalLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.18.1 snmpget -v2c -c public <target> VOICE-OPT-MIB::cdx6500VoiceCfgTxInputSignalLevel.1
Start monitoring cdx6500-family voice-gateway equipment (voice-port echo-control/signal-level config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VOICE-OPT-MIB::cdx6500VoiceCfgTxInputSignalLevel OID value, configure state conditions and alerts, and monitor any cdx6500-family voice-gateway equipment (voice-port echo-control/signal-level config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.25 | cdx6500PCTVoicePortTable | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1 | cdx6500PPCTVoicePortTable | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1 | cdx6500PPCTVoicePortEntry | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.18 | cdx6500VoiceCfgTxInputSignalLevel | VOICE-OPT-MIB |