All MIBs › VOICE-OPT-MIB › cdx6500VoiceCfgSignalingControl
cdx6500VoiceCfgSignalingControl
Module: VOICE-OPT-MIB
OID (symbolic): VOICE-OPT-MIB::cdx6500VoiceCfgSignalingControl
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Select signaling control transmission mode in E&M interface type. immediate : Digits are transmitted immediately. wink : Digits are transmitted after the WINK pulse. transparent : The voice signalling states are transmitted end to end without interpreting the signalling state. delay : Digits are transmitted after the end of the Delay Dial signal. masterColisee : 65xx is simulating Colisee master mode. slaveColisee : 65xx is simulating Colisee slave mode. seizureAcknowledge : Transmit Seizure acknowledge immediately after receiving a Seizure signal from the PBX. nc : Skipped during configuration. The parameter will be skipped for FXO & FXS type interface.
What is cdx6500VoiceCfgSignalingControl?
Chooses the signaling handshake used on an E&M trunk for passing digits: immediate, wink-start, transparent, delay-dial, master/slave Colisee simulation, or seizure-acknowledge. An admin matches this to whatever the connected PBX expects (e.g. 'wink' waits for a wink pulse before sending digits); the object is skipped entirely on FXO/FXS interfaces since it only applies to E&M.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.9 snmpwalk -v2c -c public <target> VOICE-OPT-MIB::cdx6500VoiceCfgSignalingControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.9.1 snmpget -v2c -c public <target> VOICE-OPT-MIB::cdx6500VoiceCfgSignalingControl.1
Start monitoring cdx6500-family voice-gateway equipment (voice-port echo-control/signal-level config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VOICE-OPT-MIB::cdx6500VoiceCfgSignalingControl OID value, configure state conditions and alerts, and monitor any cdx6500-family voice-gateway equipment (voice-port echo-control/signal-level config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.25 | cdx6500PCTVoicePortTable | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1 | cdx6500PPCTVoicePortTable | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1 | cdx6500PPCTVoicePortEntry | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.9 | cdx6500VoiceCfgSignalingControl | VOICE-OPT-MIB |