All MIBs › VOICE-OPT-MIB › cdx6500VoiceCfgHybridFXS
cdx6500VoiceCfgHybridFXS
Module: VOICE-OPT-MIB
OID (symbolic): VOICE-OPT-MIB::cdx6500VoiceCfgHybridFXS
OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Hybrid balance filters and termination type based on country. sixHundred : 600 ohm interface for USA, Japan and Ireland. canada : 600 ohms with 2.16 uF germany : 220 ohms in series with (820 ohms in parallel with 115nF). uk : 300 ohms in series with (1K ohms in parallel with 220nF). belgium : 150 ohms in series with (830 ohms in parallel with 72nF). france : 215 ohms in series with (1K ohms in parallel with 137nF). nc : Skipped during configuration. This parameter is displayed for DSPM/FXS and skipped for DSPM/E&M, DSPM/HC(FXO) and all virtual port types.
What is cdx6500VoiceCfgHybridFXS?
Selects the hybrid balance-network/termination profile for an FXS port, tuned to national telephony standards (600 ohm USA/Japan/Ireland, Canada, Germany, UK, Belgium, France) or nc. Mismatching this to the actual country's line impedance causes poor echo cancellation and audible hybrid rejection, so it's set based on where the FXS phone/PBX is deployed; only shown for DSPM/FXS interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.6 snmpwalk -v2c -c public <target> VOICE-OPT-MIB::cdx6500VoiceCfgHybridFXS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.6.1 snmpget -v2c -c public <target> VOICE-OPT-MIB::cdx6500VoiceCfgHybridFXS.1
Start monitoring cdx6500-family voice-gateway equipment (voice-port echo-control/signal-level config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VOICE-OPT-MIB::cdx6500VoiceCfgHybridFXS OID value, configure state conditions and alerts, and monitor any cdx6500-family voice-gateway equipment (voice-port echo-control/signal-level config status) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.449 | codex | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2 | cdxProductSpecific | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1 | cdx6500 | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2 | cdx6500Configuration | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1 | cdx6500CfgProtocolGroup | ALC-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1 | cdx6500PCTPortProtocolGroup | ALC-OPT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.449.2.1.2.1.1.25 | cdx6500PCTVoicePortTable | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1 | cdx6500PPCTVoicePortTable | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1 | cdx6500PPCTVoicePortEntry | VOICE-OPT-MIB |
| 1.3.6.1.4.1.449.2.1.2.1.1.25.1.1.6 | cdx6500VoiceCfgHybridFXS | VOICE-OPT-MIB |