VISM-XGCP-EXTENSION-MIB :: vismXgcpRestartInProgressTdinit

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › VISM-XGCP-EXTENSION-MIB › vismXgcpRestartInProgressTdinit

vismXgcpRestartInProgressTdinit

Module: VISM-XGCP-EXTENSION-MIB

OID (symbolic): VISM-XGCP-EXTENSION-MIB::vismXgcpRestartInProgressTdinit

OID (numeric): 1.3.6.1.4.1.351.110.5.5.5.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The endpoint becomes disconnected when it tries to communicate with the call agent and the retransmission procedure times out after retrying.

The endpoint in disconnected state starts the disconnected timer initialised to the random value and uniformly distributed between 1 and initial waiting delay (Tdinit) in seconds.

The gateway waits for either the end of this timer, or the reception of call agent command or the detection of local user activity for the endpoint.

When the disconnected timer elapses, or when a command is received from the call agent or when there is a local user activity, the Media Gateway sends the Restart In Progress command with the restart method as RM:disconnected to the Media Gateway Controller.

The initial waiting delay (Tdinit) timeout value is defined by this MIB object.

The recommended value of this object is 15 seconds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.5.2.1
snmpwalk -v2c -c public <target> VISM-XGCP-EXTENSION-MIB::vismXgcpRestartInProgressTdinit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.5.2.1.1
snmpget -v2c -c public <target> VISM-XGCP-EXTENSION-MIB::vismXgcpRestartInProgressTdinit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.5.2.1.1 i <value>

Start monitoring Cisco VISM voice service modules (MGX/BPX ATM voice gateways) (XGCP peer/CRCX success-failure counter status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VISM-XGCP-EXTENSION-MIB::vismXgcpRestartInProgressTdinit OID value, configure state conditions and alerts, and monitor any Cisco VISM voice service modules (MGX/BPX ATM voice gateways) (XGCP peer/CRCX success-failure counter status) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.5voiceBASIS-MIB
1.3.6.1.4.1.351.110.5.5.5vismXgcpExtensionGrpCISCO-VISM-XGCP-EXT
1.3.6.1.4.1.351.110.5.5.5.2vismXgcpEnhancementsObjectsCISCO-VISM-XGCP-EXT
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.5.5.2.1vismXgcpRestartInProgressTdinitVISM-XGCP-EXTENSION-MIB