VISM-SESSION-MIB :: vismRudpSessionCnfRowStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVISM-SESSION-MIBvismRudpSessionCnfRowStatus

vismRudpSessionCnfRowStatus

Module: VISM-SESSION-MIB

OID (symbolic): VISM-SESSION-MIB::vismRudpSessionCnfRowStatus

OID (numeric): 1.3.6.1.4.1.351.110.5.5.11.3.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable allows the user to add or delete the entry for this table. createAndGo: Use this to add a Rudp session in this table. Rudp session number, session group number, priority, local port and remote port are required while creating an entry for PRI Backhaul. On the other hand Rudp session number, local port, remote port, remote VISM IP and rudp session type are required for Lapd trunking.

active: This value is returned, once the row is created.

destroy: Use this to delete an RUDP session from this table. Only RUDP session number is needed for deleting. The last session shall not be deleted if there are still active LAPD entries.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.3
snmpwalk -v2c -c public <target> VISM-SESSION-MIB::vismRudpSessionCnfRowStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.3.1
snmpget -v2c -c public <target> VISM-SESSION-MIB::vismRudpSessionCnfRowStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.11.3.1.3.1 i <value>

Start monitoring Cisco VISM voice interworking service modules (MGX/AXIS platforms) (session-group switchover success/failure status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VISM-SESSION-MIB::vismRudpSessionCnfRowStatus OID value, configure state conditions and alerts, and monitor any Cisco VISM voice interworking service modules (MGX/AXIS platforms) (session-group switchover success/failure status) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.5voiceBASIS-MIB
1.3.6.1.4.1.351.110.5.5.11vismSessionGrpCISCO-VISM-SESSION-MIB
1.3.6.1.4.1.351.110.5.5.11.3vismRudpSessionCnfTableCISCO-VISM-SESSION-MIB
1.3.6.1.4.1.351.110.5.5.11.3.1vismRudpSessionCnfEntryCISCO-VISM-SESSION-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.5.11.3.1.3vismRudpSessionCnfRowStatusVISM-SESSION-MIB