VERTICAL-SNMP-REPEATER-MIB :: vrptrMonitorPortSentFrames

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsVERTICAL-SNMP-REPEATER-MIBvrptrMonitorPortSentFrames

vrptrMonitorPortSentFrames

Module: VERTICAL-SNMP-REPEATER-MIB

OID (symbolic): VERTICAL-SNMP-REPEATER-MIB::vrptrMonitorPortSentFrames

OID (numeric): 1.3.6.1.4.1.2338.4.2.3.1.1.17

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: This object is the number of frames of valid frame length that have been sent on this port. This counter is incremented by one for each frame sent on this port whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not asserted.

A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.

This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours at 10Mb/s.

What is vrptrMonitorPortSentFrames?

A running count of valid-length frames sent on this port with no FCS error or collision — the transmit-side counterpart to vrptrMonitorPortReadableFrames, useful for confirming this port is actually forwarding traffic outbound.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2338.4.2.3.1.1.17
snmpwalk -v2c -c public <target> VERTICAL-SNMP-REPEATER-MIB::vrptrMonitorPortSentFrames

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2338.4.2.3.1.1.17.1
snmpget -v2c -c public <target> VERTICAL-SNMP-REPEATER-MIB::vrptrMonitorPortSentFrames.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> vrptrMonitorPortSentFrames.1

Start monitoring Vertical Networks SNMP repeater/hub (per-port status/collision-count status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VERTICAL-SNMP-REPEATER-MIB::vrptrMonitorPortSentFrames OID value, configure state conditions and alerts, and monitor any Vertical Networks SNMP repeater/hub (per-port status/collision-count status) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2338verticalVERTICAL-EVENTLOG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2338.4vsnmpDot3RptrMgtVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.2vrptrMonitorPackageVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.2.3vrptrMonitorPortInfoVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.2.3.1vrptrMonitorPortTableVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.2.3.1.1vrptrMonitorPortEntryVERTICAL-SNMP-REPEATER-MIB
1.3.6.1.4.1.2338.4.2.3.1.1.17vrptrMonitorPortSentFramesVERTICAL-SNMP-REPEATER-MIB